ONE LIFE LIVE IT. D90
Active Member
Hi there,
Yes i know there is loads of info on this and
Ive done a lot of research tonight into how the R380 gearbox works (as im clueless), and gained a little amount of info, as well as researching the the correct oil. (Hours if searching)
I have a 1995 300tdi defender with 130k. Currently running with new ATF in the geabox, like it has done all its life i guess. Fresh ATF improved the changes significantly when its warm, to near perfect.
However, when the engine/gearbox is cold, it makes second gear almost impossible to get in unless it is forced. Yet no issues with the other gears.
If the syncromesh was worn 1st to 2nd- wouldnt this happen when the gearbox was warm too?
Which therefor leads me to question the oil. As i understand MTF94 is now recommended for the R380, which i was advised to use some years ago on here. Is this going to make the changing worse or better? As i beleive its thicker than ATF.
Thanks for reading and any help will be greatly appreciated!
Yes i know there is loads of info on this and
Ive done a lot of research tonight into how the R380 gearbox works (as im clueless), and gained a little amount of info, as well as researching the the correct oil. (Hours if searching)
I have a 1995 300tdi defender with 130k. Currently running with new ATF in the geabox, like it has done all its life i guess. Fresh ATF improved the changes significantly when its warm, to near perfect.
However, when the engine/gearbox is cold, it makes second gear almost impossible to get in unless it is forced. Yet no issues with the other gears.
If the syncromesh was worn 1st to 2nd- wouldnt this happen when the gearbox was warm too?
Which therefor leads me to question the oil. As i understand MTF94 is now recommended for the R380, which i was advised to use some years ago on here. Is this going to make the changing worse or better? As i beleive its thicker than ATF.
Thanks for reading and any help will be greatly appreciated!