G

George mac

New Member

• Mar 23, 2018

• #1

Hi all, looking for a bit of advice. I'm a proud owner of a 1999 td5 that has developed a problem .I have no hazards, no interior light, my front windows don't work either and my heated screens don't work. I've had a look at the fuses under the steering wheel and all look OK. I've had a look under the bonnet at the fuses there and fuse 7 has no power either side of it. Any ideas. I have a bit of knowledge but struggling here
Thanks in advance George

 

sierrafery

Well-Known Member

• Mar 24, 2018

• #2

Check fusible link FL3, .... F7 and 8 should have feed only when the heated screen is switched on as the relay to be closed

 

Last edited: Mar 24, 2018

G

George mac

New Member

• Mar 24, 2018

• #3

Thank you for replying. FL3 has power to both sides.

 

G

George mac

New Member

• Mar 24, 2018

• #4

George mac said:

Thank you for replying. FL3 has power to both sides.

Click to expand...

I'm beginning to suspect the bcu is faulty as there seems to be loads of random faults with one common denominator the bcu. What's your thoughts

 

I

iansoady

Active Member

• Mar 25, 2018

• #5

Water ingress in the under-dash fusebox / IDM? It's easy enough to take it out (at the cost of a few skinned knuckles) and check. You need to pop its lid off to get a good look inside.

 

G

George mac

New Member

• Mar 25, 2018

• #6

iansoady said:

Water ingress in the under-dash fusebox / IDM? It's easy enough to take it out (at the cost of a few skinned knuckles) and check. You need to pop its lid off to get a good look inside.

Click to expand...

Hello Ian. Thank you for your reply. I've been under the bonnet and had the fuse box out from under there. I found 3 wires rotten through and crusty with green crud. They were disconnected completely. I've cleaned them up and reconnected them. That's gave me power to the blower and side lights. Looks like its the cabin fuse box next. Is it a similar arrangement as the engine bay fuse box with a heap of plugs behind there. Vehicle electrics give me the fear tbh and disco electrics seem to be fairly unforgiving by the looks of it

 

G

George mac

New Member

• May 20, 2018

• #7

Update so far, disco is still sitting. Cabin fusebox has been out and is like new .Changed bcu for a second hand one and that has given me my front windows, hazards etc back but it's immobilized and keeps kicking me out when I try to programme it using rovacom. Next step is to find a bcu that has the EKA code. Hopefully that will allow me to set my fobs and injectors and get her running again