W

waddy1200

Active Member
was changing my front shocks this afternoon and thought while im under there ill grease the uj and prop shaft. took hand break off and put it in neutral and both front wheels span but not the front prop shaft. puzzled as to what has happened. I tried it in drive and reverse but nothing turned. eventually I greased them the way I normally do it. me under the car in access mode and my wife going slowly so I can get to the grease nipples.
 
try jacking one wheel up box in neutral ,and using a long bar and socket try to turn wheel,it would be stiff to turn unless you had a rear wheel up because of the viscous coupling
 
waddy1200 said:
was changing my front shocks this afternoon and thought while im under there ill grease the uj and prop shaft. took hand break off and put it in neutral and both front wheels span but not the front prop shaft. puzzled as to what has happened. I tried it in drive and reverse but nothing turned. eventually I greased them the way I normally do it. me under the car in access mode and my wife going slowly so I can get to the grease nipples.
Click to expand...

The other front wheel would have span in the opposite direction, it's known as a "differential" you'll have one on the rear as well. :D :behindsofa:
 
The prop wouldnt spin as its attached to the rear prop through the viscous coupling, thats how the 4 wheel drive system works on the P38, you'd need to jack a rear wheel off the ground as well as a front one to spin the props
 
Nickpen said:
The prop wouldnt spin as its attached to the rear prop through the viscous coupling, thats how the 4 wheel drive system works on the P38, you'd need to jack a rear wheel off the ground as well as a front one to spin the props
Click to expand...

Correct. :)
 
thats a good point nickpen never thought of that one I just had thoughts of the viscous coupling being knackered. as for life insurance neither of us have it so im worth more to her alive than dead that's why I trust her :D:D
 
waddy1200 said:
thats a good point nickpen never thought of that one I just had thoughts of the viscous coupling being knackered. as for life insurance neither of us have it so im worth more to her alive than dead that's why I trust her :D:D
Click to expand...

If i may say so, your proposed method is the stupidest thing i have heard in a long time.
 
"me under the car in access mode"

If he can get under the car in access mode either he's very very thin or he's done it before and she's already driven over him - several times. :)

Maybe he means wading height . . .

A
 
You must log in or register to reply here.

Similar threads

ar1g3
P38A Tips for torquing prop shaft bolts?
Replies
16
Views
2K
romanrob
R
Zorro587
Noise gone but prop shaft queries abound
Replies
14
Views
928
Chris_68
C
JoeCoutz
Defender TD5 90 - Play in front Prop Shaft - DON'T WANT TO DRIVE!
Replies
6
Views
1K
lynall
L
C
L322 td6 auto 2005 No Drive when hot
Replies
12
Views
1K
chu017
C
Paul Coddington
P38A Viscous coupling
Replies
7
Views
327
Grrrrrr
Grrrrrr