Dr_evil
Banned
It'll be a husky if its ex board, last one I saw went for £400 and another for £200
It will therefore still be nice and used looking due to sitting on the front uncovered for however many years they owned the 110
It'll be a husky if its ex board, last one I saw went for £400 and another for £200
It will therefore still be nice and used looking due to sitting on the front uncovered for however many years they owned the 110
It'll be a husky if its ex board, last one I saw went for £400 and another for £200
It will therefore still be nice and used looking due to sitting on the front uncovered for however many years they owned the 110
how much for the pto gear box and all the bits
look used, but could be in new working order as it may of never been used
Dr_evil
Banned
this is the entire set up, check the price
LAND ROVER DEFENDER , HYDRAULIC SUPERWINCH HUSKY , WINCH BUMPER , PTO DRIVE | eBay
Now if its the PTO one its even cheaper
http://www.ebay.co.uk/itm/superwinc...icle_Parts_Accessories_ET&hash=item338307f8ac
LAND ROVER DEFENDER , HYDRAULIC SUPERWINCH HUSKY , WINCH BUMPER , PTO DRIVE | eBay
Now if its the PTO one its even cheaper
http://www.ebay.co.uk/itm/superwinc...icle_Parts_Accessories_ET&hash=item338307f8ac
ratty
I'm not special I'm limited edition
Maybe you should find the price of the ones that have been sold cos everyone waits until the last minute to bid on em.
The complete setup with props is worth at least £600 in my opinion. A prop winch can be converted to hydraulic or leccy. If it is gonna get sold on and the winch shafts are up for grabs then I'm happy to pay decent money just for the shafts cos they are rare as rocking horse dung and I've been after a set for 5 years and every time I think I've found some they vanish into thin air.
The OP can easily mount the winch on a different bumper and sell the original bumper on to help cover the cost of the replacement bumper.
Dr_evil
Banned
Last one I saw went for £400 for a complete set up and bumper and it was pretty good, bumper was dented though
As pikey said its gonna have to be mint and if its been sat on the front of a leccy board 110 for the last decade its not going to be a minter
ratty
I'm not special I'm limited edition
Last one I saw went for £400 for a complete set up and bumper and it was pretty good, bumper was dented though
As pikey said its gonna have to be mint and if its been sat on the front of a leccy board 110 for the last decade its not going to be a minter
I reckon that if he stuck it on eblag he would get more for it than you say he will.
You also didn't bother to tell him that all he had to do was fit the winch onto a disco winch bumper. Not being cynical here but I think you want summit for nothing.
When the winches go cheap on ebay it's generally cos it's local pick-up only and in a s**t place to get to. If he lives pretty central so not far to go to pick up or can pack it on a pallet for a courier and find someone to deliver it for around £80 it'll sell for a good price.
Dr_evil
Banned
Was in newcastle IIRC and I'm pretty sure that he could work out that all he would have to do was fit it onto a disco bumper
I posted up a couple of pics from google to show him the difference in the legs and even told him that if he was going to cut the tray off he'd need to make new legs for the tray so it mounts to the chassis correctly as its vertical on the disco
I've already got a husky and twin alternator setup that I can use if needed to power it and I'm bidding on a complete garwood setup on the farm auctions
was looking around and you should be able to go to a tractor place and be able to buy complete yoke assemblies for 25quid and a square slip tube shaft for under 40quid so under 100 quid and you could make one. as them shear pin joints are cheap. just have your measurements(diameter) for the shafts on the gear box and pump and shear pin size dia
ratty
I'm not special I'm limited edition
I just need one sliding joint yoke that takes hex bar and I'm in business.
what size hex?
ratty
I'm not special I'm limited edition
The main prop may be the wrong size for a disco but you should be able to get a new one made at an agricultural prop specialist pretty cheaply ( you can keep the u/j's (the expensive bits) you already have and slot em on the keyways of the new prop. If you do need a longer prop and yours is up for grabs can I have first dibs on it please.
Pikey
Dummy Ejection Facilitator..
Push the lever over then turn the shaft where it comes out of the winch.
