paddocks1967
New Member
Hi lads, I seen a psi powerfix box on a car at the scrappieis today and I was wondering if it will fit any car or is it chipped just for that car is it worth my while taken it,cheers pat
Steve_R1979
Active Member
Will be for any car of that age, with that engine I would have thought.
If your car is the same make/model, of similar age with the same engine then yes, if your car is totally different, then no.
If your car is the same make/model, of similar age with the same engine then yes, if your car is totally different, then no.
paddocks1967
New Member
hi steve,i take it,it will be east enough to fix on the car.pat
paddocks1967
New Member
hi lads,there is two plugs on it and a hose that must fit somewhere any ideas,cheers pat.
Mike v.t.s
Active Member
The hose goes to the boost pressure control valve (think thats what its called) basically on the fuel filter housing at the top theres a little black "box" that has a plug and a rubber hose on it... thats where it goes... or you could email psi motor sport in belguim and they will give you fitting instructions. good luck
Datatek
Well-Known Member
The hose goes to the boost pressure control valve (think thats what its called) basically on the fuel filter housing at the top theres a little black "box" that has a plug and a rubber hose on it... thats where it goes... or you could email psi motor sport in belguim and they will give you fitting instructions. good luck
Manifold absolute presure sensor, the psi pipe needs tee ing into the MAP pipe.
PSI boxes vary according to the year of the P38, no pipe on mine.
paddocks1967
New Member
hi datatek,there is two plug ins on the box plus the hose where does the plug in go to,and i will pm you about the eas cable when i get my paypal up and running again.cheers pat.
Datatek
Well-Known Member
If you look under the inlet manifold on the top of the FIP, you will see a round connector, it's hard to get at, it's a bayonet type you twist the ring to realease it. One power box connector goes into the socket on the FIP and the other connects to the plug you have just removed
If your P38 has an EGR, then I suspect you have the wrong power box, won't do any harm to try it tho.
