Cliff4WD
Active Member
I'm almost finished refurbishing my front prop. I have trawled the forums looking for an answer to my issue, but found others with same problem but no answers. The issue is, I have replaced the centre bearing inside the Hooke's (double cardan) joint and expected the bearing kit to contain a new hard rubber dust cover: It does not. Now, I realise these shafts are made as non-serviceable items, and what I'm doing is fitting replacement UJs from a kit of parts, but what should I do about the missing cover? Does anybody know a supplier or source I can get one from, or do I just leave it off? I can't reuse the old one as it is well and truly FUBAR!
![](/lz/proxy.php?image=https%3A%2F%2Fi.postimg.cc%2F3w9pRfh9%2Fimage.jpg&hash=8442ce4e1f8a5ce9ba34bf03f449bdda)
![](/lz/proxy.php?image=https%3A%2F%2Fi.postimg.cc%2F3w9pRfh9%2Fimage.jpg&hash=8442ce4e1f8a5ce9ba34bf03f449bdda)
Last edited: