kevsj

New Member
hi there im getting a bit confused as how my props should be,

pic 1 , iv found the arrow on the long shaft, not that it means much to me because i dont have any idea what to match it up with, i did find a spot on the short end
12484_IMAG0072_1.jpg


12484_IMAG0073_1.jpg

pic 2 is how i thought they went yokes in line, but always seem to be tooth out

12484_IMAG0074_1.jpg

pic 3 is opposite

im really lost off so any help would be great
 
Why did you take the prop apart ??
i took them off when fitting a new transfer box and decided to greese,clean the prop splines not looking at how they were and thinking they went back together ,yokes in line but now got bad vibration when driving
 
front has spline to axle end rotate front 1 - 2 splines in front of staight like rear ,as default put front the same as rear
 

Similar threads