B

bigchap

New Member
my paint is a bit scabby with bare patches,do i need to use etch primer or just use paint straight over the ali?i'm going to paint it anyway but probably just a hand brush job.what would be the best paint to brush paint it with?
 
To do it proper like you need
1. Acid etch primer (Paddocks do some for around £8 a tin enough to prime a swb hard top)
2. Primer
3. Topcoat.
 
Just while you're on the subject of Paint.

What about this as a primer;
Etch Primer Galvanised Steel Aluminium Metal Anti Rust on eBay, also, Paint Varnish, DIY Materials, Home Garden (end time 18-Dec-07 12:03:21 GMT)

Havent bought anything from them in partictular (as was on vehicle when i got it, but previous owner supplied spare paint), but ive got their MV Nato Green on my S3 at the moment (photos in the gallery, and on my user picture) and looks really gd. Not too expensive either, and good to know you can get a supply!
 
how much is in the cans from paddocks?


having enough trouble typing at moment never mind searching. got whineing 6month old baby on my knee :)
 
ye could always try yer local indy paint suppliers for etch primer, works out a lot cheaper than the likes of Halfrauds etc
 
iannotts said:
My local specialist want about £13 ltr for synthetic so god know how much for etch primer :)
Click to expand...
My local (Autorads) cost me aboot £30 for a 5ltr tin of synthetic:D The etch primer (with filler) came in spray cans, ah think it were a fiver for a big tin, Halfrauds wanted summit like a tenner for the same:eek:
 
Do ya think it's dried yet. just reading that thread got all nostalgic It were me 1st intro to Dik1.7mm It all started so well and then went to **** so fast. Bit like dik1.7 really
 
Bet he put it on so thick it never dries :D, From what I have seen of his threads he as always been a ****
 
Lets start a "review dk's threads" thread. It'll be crucitatingly crap but it shud get a laff or two
 
bigchap said:
i think i'll go for a big bucket of b&q's finest grey gloss and a gloss roller!:)
Click to expand...
Nooooooooo don't do it.

You will devalue your landy.
Because you have a tax exempt Landy its worth doing properly or not at all.
Someone painted my 2a by hand and it F***ing crap, I'm slowly stripping and repainting to fix it.
It would be better if they had never painted it.
Please do it proply or leave it alone.:)
 
only joking!,i am thinking of leaving it as it is but was a little concerned about the areas that are through to bare metal.it actually scrubbed up o.k. as you can see.
 

Attachments

  • abc.JPG
    abc.JPG
    86.8 KB · Views: 211
You must log in or register to reply here.

Similar threads

G
Series 2 Steering wheel paint ?
Replies
15
Views
951
lynall
L
IDK...
What primer do i use on aluminium
2
Replies
33
Views
5K
dag019
dag019
Inner Farmer
Series 3 floor boards
Replies
0
Views
424
Inner Farmer
Inner Farmer
Inner Farmer
Series 3 floor boards
Replies
7
Views
826
Inner Farmer
Inner Farmer
L
Disco 1 How were the Chassis’s originally painted?
Replies
10
Views
354
grewth
G