Hello Mates,

Where is the D1's Pressure Reducing Valve (commonly called a Proportioning Valve in the US) mounted on a non-ABS model???

I need to know because I want to fit one on my RRC, along with a D1 MC and Servo. I understand this is the best way to convert an RRC from ABS to non-ABS. DPO ripped out the ABS stuff and fitted a poorly matched MC.

Anyway, does it mount to the frame or fender? Does it need to be below the MC? Also, am I correct thinking the pipes from the MC go to the bottom of the valve body and the three outlets are on top?

TIA,

jon

I was elpin me mate replace the brake pipes on his 200TDi Disco the other day. His valve is mounted on the inner wing, just below the master cylinder.

Ta ever so mate. Ahhhhh, Carlsberg, yummy!