Edward Green · Dec 20, 2016

hi guys

going to carpet and seat the rear of my 110. there are one or two small bolt holes where things have been attached at some point, before I carpet (or sound proof the roof) should I be looking to have these holes filled to avoid the carpeting getting wet and making her rusty? if yes any recommendations for what/how? is it a welding job or is there a body work filler out there I cant find?

Thanks!

Ed

Flossie · Dec 20, 2016

Rivits up to 6mm, pan head bolts or rubber blind bungs for bigger.

Edward Green · Dec 20, 2016

Flossie said:
Rivits up to 6mm, pan head bolts or rubber blind bungs for bigger.

thanks hadn't thought about rivets.

Mr S1 · Dec 20, 2016

Rubber bungs are what I used, work a treat and easy to remove if needed. Just ran a bead of silicon round before seating.

Edward Green · Dec 20, 2016

Mr S1 said:
Rubber bungs are what I used, work a treat and easy to remove if needed. Just ran a bead of silicon round before seating.

thanks!

mikescuba · Dec 21, 2016

I used rubber bungs which have worked for mine.
http://www.ebay.co.uk/itm/252615027854?_trksid=p2057872.m2749.l2648&ssPageName=STRK:MEBIDX:IT

lynall · Dec 21, 2016

What ever you do the carpet will end up wet sooner or later!

Edward Green · Dec 21, 2016

lynall said:
What ever you do the carpet will end up wet sooner or later!

that is true condensation is definitely an issue in there!

lynall · Dec 21, 2016

I think you can get waterproof/rot proof carpet?

Dippypud · Dec 21, 2016

lynall said:
I think you can get waterproof/rot proof carpet?

stable matting ?

lynall · Dec 22, 2016

Possible but I was thunking more along the marine lines

Edward Green

Member

Flossie

Well-Known Member

Edward Green

Member

Mr S1

Well-Known Member

Edward Green

Member

mikescuba

Well-Known Member

lynall

Well-Known Member

Edward Green

Member

lynall

Well-Known Member

Dippypud

Never Knowingly Understood

lynall

Well-Known Member

Similar threads