RustyDefender

Well-Known Member
Currently doing a new hose, does anyone know the size of the rubber hose needed to push on? The bigger hose without the crimped fitting.

1723497432056.png
 
What engine?

Iirc when same hose went on my 200 it was bloody expensive, so I bought a disco 200 one and cut it down lengthwise.

You can get wire reinforced silicone hose off ebay etc.
 
What engine?

Iirc when same hose went on my 200 it was bloody expensive, so I bought a disco 200 one and cut it down lengthwise.

You can get wire reinforced silicone hose off ebay etc.
Yeah just both hoses either side are gone, so need to work out what size they are
 
Yeah just both hoses either side are gone, so need to work out what size they are
Just measure the OD of the steel pipes the duff hose slips onto.

Rough rule is, solid pipe is measured OD and flex hose/pipe is measure ID.

Auto hoses tend to a pretty std size, for example most heater hoses are 15mm ID and pas could be 19mm ID, or even larger.
 

Similar threads