A

acrimple

Member

• Oct 6, 2009

• #1

Hi All,
Have a 110 hybrid defender with a 2.5NA engine instead of 200TDi - well it bucks the trend. The steering pipe is split around the brackets at the front - high pressure side. How can I tell if the pump that is fitted is the original TDi pump or one from the 2.5NA - so I can order the right pipe.

 

D

discomania

Well-Known Member

• Oct 6, 2009

• #2

I would imagine it will be the pump matches to the 2.5 to fit the TDI pump would need a bit of modification. Does the pump have a more or less all round body and is bolted on below the alternator?

 

A

acrimple

Member

• Oct 6, 2009

• #3

yes - the body is round and it is bolted just below the alternator

 

timberjock

Active Member

• Oct 7, 2009

• #4

both pumps are the same just that the union fittings are differant at the back your tdi hass crimped ends on the rubber hose where the n/a fitting is nut , jist a big version of a brake pipe. Maybe a hydraulic firm could help you out .

 

A

acrimple

Member

• Oct 8, 2009

• #5

Thanks for that - the rubber hose is crimped onto the pipe - so suggests that the pipework is original Tdi not 2.5NA