S

shuffles

New Member

• Jun 13, 2013

• #1

hello
i ve got a leak from the power steering , it seems to be dropping from the box (but that could be the lowest point) ive removed the 3 screws and cover in the wheel arch cleaned the area but still cant find where the keak is
how difficult is it to strip down and change the seals what do i have to remove to get the pipes and steering box out
thanks

 

jamesmartin

Well-Known Member

• Jun 13, 2013

• #2

seal change isnt too bad but to get box out you need to drop panhard rod ,struggle with coolant pipes

 

S

shuffles

New Member

• Jun 14, 2013

• #3

is it better to remove the rad and how long does the whole job take

 

jamesmartin

Well-Known Member

• Jun 14, 2013

• #4

you can but its not necessary its the coolant pipes at bottom can get in the way,a good few hours

 

tuskar

Active Member

• Jun 14, 2013

• #5

Just another suggestion , I had a leaky PS box also. Dropped an anti-leak chemical product into the PS fluid and it stopped the leak completely.and that's about 3 years or 40k ago.