14platoon

Active Member
Hello
I have found plenty of threads on power steering but I'm looking for a simple explanation, ie where to bolt stuff etc. In an ideal world a picture tutorial.
I have a Defender 90 ex MOD FFR on a 2.5 Diesel engine.
I have parts on order from a similar vehicle which had power steering, I just need the instructions on how to hook it all up.
Thanks
 
pas pump bracket replaces the alternator bracket
you need to swap crank pulley if just a single ,you need double or triple
steering box is just swapped you will probably need the 4 bolts
reservoir will sit on either side of rad bolted to the wing depending on the length of the return hose
hoses run on rear side of front cross member
 
pas pump bracket replaces the alternator bracket
you need to swap crank pulley if just a single ,you need double or triple
steering box is just swapped you will probably need the 4 bolts
reservoir will sit on either side of rad bolted to the wing depending on the length of the return hose
hoses run on rear side of front cross member
Thank you, great answer.
It was an FFR so has the double pulley on the front. Will this pulley suffice?
 
I fitted pas to my ex-mod so if you want any pics let me know, it's quite straight forward though
 
I would love some photos of it please.
In Kent near Rochester.

Okay will take some in a bit for you.

I in West Sussex but find myself
In Sevenoaks and tunbridge wells so if you end up really confused you could always eyeball mine in real life!
 
Power steering in.........wow what a difference. Very pleased!
I ended up paying my local garage to do the job in the end as I'm always short of time. Many thanks Flat for your emails and photos, I printed these off for the garage to use for reference.
Thanks all, thoroughly recommend this upgrade.
 

Similar threads