J

jaykingfunk

Member

• Dec 26, 2012

• #1

Evening all,

My father in law has recently bought a 1980 series 3 light weight and is wanting to convert it to power steering.

He doesn't use forums so asked if I could get some help for him!

Basically he wants to know what gear people fit when converting to power steering and from what vehicle do you get the parts etc.?

He know's his stuff and is very handy with a set of spanners so any links to previous threads/pics that you folk think can help or general advice would be much appreciated.

Cheers, J.

 

Rattlegun

Well-Known Member

• Dec 26, 2012

• #2

There's a thread started on this just below somewhere.

 

Dr_evil

Banned

• Dec 26, 2012

• #3

I suggest manning up

nothing wrong with the standard steering set up cos if not it involves a lot of butchering unless you buy a very expensive kit……..

 

juiceyv8

New Member

• Dec 26, 2012

• #4

Go to the gym.

 

A

aaronledwidge

New Member

• Dec 26, 2012

• #5

I have just put a thread up detailing my conversion to power steering. Saying that mine was to help the missus out as the steering was pretty heavy, mostly due to a half siezed relay but it made a good excuse.

 

Dr_evil

Banned

• Dec 26, 2012

• #6

So you lied wimp

 

A

aaronledwidge

New Member

• Dec 26, 2012

• #7

Ha Ha nah, i was fed up of having the wheel try and remove fingers off road and the lady refuse to drive it as it was too heavy. Plus im in for a shoulder reconstruction in january so need everything in my life to be as easy as possible for a while. But yeah there is a little butchering but i have made no changes to mine that would stop me re fitting the old steering back in if i ever wanted to there would just be the plate welded to the chassis.

 

Dr_evil

Banned

• Dec 27, 2012

• #8

You not had to move the crossmember forward ?

 

A

aaronledwidge

New Member

• Dec 27, 2012

• #9

nope used a p38 box, have a look at the thread there are a fair few pics, it was a much easier job than i ecpected to be honest although i have a fair few bits to sort still.

http://www.landyzone.co.uk/lz/f6/tdi-power-steering-conversion-pic-heavy-209598.html

I basically welded 6mm plate to the face and across the top and then crush tubes to the outside of the chassis.