biketeacherdave

biketeacherdave

Well-Known Member
what do the hg experts think then i was under the car looking for a mystery clonk, mite be drop links and noticed that the engine has a small amount of oil dripping off it i mean a tiny amount seeing as i recently did my valley gasket and end seals i wasnt expecting to find this
 

Attachments

  • headgasketleak.jpg
    headgasketleak.jpg
    23.1 KB · Views: 160
its deffinatly comming from the head gasket area you can just see the bottom of the exhaust manifold in the picture gonna clean it up tomorrow and monitor i have no mixing of oil/water or any of the usual symptoms i do have a slight ticking/cam noise i will carry out a compression test all plugs look good iv done a sniff test all good it could just be old oil build up from leaking rocker/valley gaskets or something more sinister :confused::rolleyes::rolleyes: just odd its clean on top and oily below gasket level
 
well i think iv answerd my own question my engine oil is glowing under the black light, i added fluro dye to my cooling system a while back looking for a leak i have had problems with rad top hoses n clips etc i dont have any other normal symptoms of hg failure so unless my valley gasket is leaking coolant slightly, unlikley then it looks like its hg or slipped liner, time to pull the heads n have a look see

fluro dye its great stuff :(:(:(
 
watch this space hg kit n new stretch bolts orderd already iv got a few days off at the end of the month so will pull the heads then
 
Dave, you'll find the HG replacement a cake walk. though what i would suggest is soak the manifold bolts in release oil for a few days before..

oh and pre order the manifold to cat bolts and studs and manifold bolts too
 
I dont know about petrol engines but my diesel leaks from the Oil cooler O rings and has to be replaced quite regulary.
 
ukadamwest said:
Dave, you'll find the HG replacement a cake walk. though what i would suggest is soak the manifold bolts in release oil for a few days before..

oh and pre order the manifold to cat bolts and studs and manifold bolts too
Click to expand...


cheers adam i was hoping to not have to unbolt the cats but i see where your comming from, hg kit arrived today just sorting out a decent place to get the heads skimmed a mate has a couple of heads sitting on the shelf at his work shop all refurbed n ready to go just waiting to see how much he wants for them so i can decide if i do a straight swop or not as for the manifold bolts didnt think of those, i should know better i replaced an exhaust on one of my bike n 2 studs broke off i has to drill them out and helicoil them.

so far i checked the heat sheild bolts and they all apart from 1 undo that 1 didnt shift at all and rounded off very easily, bugger

i mite start a new thread on head gasket and post reports and photos as there isnt any recent write ups on here i could find on search
 
biketeacherdave said:
cheers adam i was hoping to not have to unbolt the cats but i see where your comming from, hg kit arrived today just sorting out a decent place to get the heads skimmed a mate has a couple of heads sitting on the shelf at his work shop all refurbed n ready to go just waiting to see how much he wants for them so i can decide if i do a straight swop or not as for the manifold bolts didnt think of those, i should know better i replaced an exhaust on one of my bike n 2 studs broke off i has to drill them out and helicoil them.

so far i checked the heat sheild bolts and they all apart from 1 undo that 1 didnt shift at all and rounded off very easily, bugger

i mite start a new thread on head gasket and post reports and photos as there isnt any recent write ups on here i could find on search
Click to expand...
Hi Dave, if you google PaulP38.com he has some interesting stuff on his website, he has done the head gaskets on his V8 with a complete write up and pictures to boot.
Hope this helps.
Paul
 
PPP38vouge said:
Hi Dave, if you google PaulP38.com he has some interesting stuff on his website, he has done the head gaskets on his V8 with a complete write up and pictures to boot.
Hope this helps.
Paul
Click to expand...

thanks very much for that i oddly have that on my book marks from old research lol and iv read it a few times since :D:p:p

watch this space il do a write up with pics i did my valley gasket so pretty much the same job :eek:
 
You must log in or register to reply here.

Similar threads

G
TD5 Head Gasket?
2
Replies
24
Views
3K
Stanleysteamer
Stanleysteamer
A
Head Gasket Replacement?
2 3
Replies
40
Views
4K
Anaconda
A
J
2.0MPi losing power head scratcher
Replies
17
Views
3K
marjon
marjon
ar1g3
P38A Head gasket advice needed
2 3 4
Replies
76
Views
7K
Grrrrrr
Grrrrrr
dinisrosa
Td5 Head gasket thickness
Replies
0
Views
1K
dinisrosa
dinisrosa