StuckAgainSteve · Mar 26, 2013

jamesblake said:
Oh yea, didn't think of that and it was sooooo cold! Will try again tonight.

Which will make the situation even worse, some modern chargers have a snowflake symbol on them, this is for charging batteries in cold ambient temperatures, selecting this mode will bump the charge voltage up a tad to compensate for the cold weather hampering the charge process.

Datatek · Mar 26, 2013

jamesblake said:
Oh yea, didn't think of that and it was sooooo cold! Will try again tonight.

It will need a good few hours on charge.

jamesblake · Mar 31, 2013

Hi guys,

Still trying...the car is super locked...so I'm never getting in I guess....

Anybody selling a window??

James

Grit Valve · Mar 31, 2013

jamesblake said:
Hi guys,

Still trying...the car is super locked...so I'm never getting in I guess....

Anybody selling a window??

James

Hold on did you take the grill off and open the bonnet??

jamesblake · Mar 31, 2013

Na,

Don't think it's gonna help, cause keycode lockout is on.

Grit Valve · Mar 31, 2013

jamesblake said:
Na,

Don't think it's gonna help, cause keycode lockout is on.

Isn't that the wait half an hour warning when eka is entered incorrectly

If you got the bonnet open put a good battery on and start again .

jamesblake · Mar 31, 2013

Defender,

Sorry stressing myself out a lot!

If I break the grill, and connect the snap on booster for half hour or new battery, how will I then be able to get into the car??

James.

Grit Valve · Mar 31, 2013

jamesblake said:
Defender,

Sorry stressing myself out a lot!

If I break the grill, and connect the snap on booster for half hour or new battery, how will I then be able to get into the car??

James.

By waiting for the key code lockout to go end entering the eka code to let you in

jamesblake · Mar 31, 2013

I can't enter the keycode thou can I?

The door locking mech isn't working and I'm outside the car.

The only way I can is with my Nanocom.

Grit Valve · Mar 31, 2013

jamesblake said:
I can't enter the keycode thou can I?

The door locking mech isn't working and I'm outside the car.

The only way I can is with my Nanocom.

Yep got you just reread erm
Although lock not working is it Registering the turns via the dash red light if not the i guess your bazzoked

Grit Valve · Mar 31, 2013

I think it must be otherwise how would you get key code lock out get the bonnet open good battery keep calm enter the correct code
Looking at the dash alarm light should be indicating your entering the code hope this helps once code accepted although your door lock doesn't open hopfully the others will

Saint.V8 · Mar 31, 2013

Could be time for a Brixton key (brick) to get in, but remember if it is superlocked you wont be able to use the sill buttons to unlock the doors.

May have to use the Nanocom to cycle the locks (if you can - dont know the Nanocom at all well) but you could get the bonnet open to charge battery at least!

Grit Valve · Mar 31, 2013

Saint.V8 said:
Could be time for a Brixton key (brick) to get in, but remember if it is superlocked you wont be able to use the sill buttons to unlock the doors.

May have to use the Nanocom to cycle the locks (if you can - dont know the Nanocom at all well) but you could get the bonnet open to charge battery at least!

Saint you can operate the locks with nano, question is if the door lock Actuator doesn't works does it still read the turns of the barrell????

Saint.V8 · Mar 31, 2013

defender300td1 said:
Saint you can operate the locks with nano, question is if the door lock Actuator doesn't works does it still read the turns of the barrell????

Should still read key inputs for the EKA as this is done through the lock microswitch not the lock motors!

Grit Valve · Mar 31, 2013

Saint.V8 said:
Should still read key inputs for the EKA as this is done through the lock microswitch not the lock motors!

That's what I thought so hopfully the micro is working as it sounds it is via the key code lock out message

jamesblake · Mar 31, 2013

Hmmm.....worth at try, I can get the car power through the caravan socket, so if I leave half hour then try eka in door it might work?

I got code in my phone, just need sequence please guys....manual is in car

Cheers.

Grit Valve · Mar 31, 2013

Read this try both ways starts off with Initially direct key code numbers and the other way with four turns first then your eka code read through all is explained and a pictures

http://www.landyzone.co.uk/lz/f10/95-p38-immobiliser-eka-input-119107.html

Grit Valve · Apr 1, 2013

How you getting on did you get a charge in?

Or did you lose it and brick it

jamesblake · Apr 1, 2013

Right, tired charge for 30 mins, key code lockout disappeared tired eka sequence, nothing....light didnt seem to acknowledge and it don't open....

I'm going to have to brick it, but need to order new window first....

Is a drivers window hard to fit??

Grit Valve · Apr 1, 2013

jamesblake said:
Right, tired charge for 30 mins, key code lockout disappeared tired eka sequence, nothing....light didnt seem to acknowledge and it don't open....

I'm going to have to brick it, but need to order new window first....

Is a drivers window hard to fit??

Give dogsbody a shout think that's he's game

Sorry James worth a try tho ..

Well-Known Member

Well-Known Member

Active Member

2000 4.6 Vouge

Active Member

2000 4.6 Vouge

Active Member

2000 4.6 Vouge

Active Member

2000 4.6 Vouge

2000 4.6 Vouge

Dyed-in-the-wool 100% RR Junkie

2000 4.6 Vouge

Dyed-in-the-wool 100% RR Junkie

2000 4.6 Vouge

Active Member

2000 4.6 Vouge

2000 4.6 Vouge

Active Member

2000 4.6 Vouge

Similar threads