Got to cut out a big subframe under the floor of the Mercedes bus that we are converting, and angle grinders won't get into most of the areas we have to cut through, so a plasma cutter is on the cards.
There are three layers of steelwork, at least two have to come out, probably all three as one is just underfloor stiffening for the Unwin wheelchair tracks above the floor.
This is an identical body/floor:
So, any thoughts or recommendations?
Looking on fleabay, the £180 - £250 machines seem to be OK.
Peter

There are three layers of steelwork, at least two have to come out, probably all three as one is just underfloor stiffening for the Unwin wheelchair tracks above the floor.
This is an identical body/floor:

So, any thoughts or recommendations?
Looking on fleabay, the £180 - £250 machines seem to be OK.
Peter
Last edited: