Thanks for all the replys fellas. I'm pretty handy with a mig so not worried about that at all. I think I'll shop around and see if I can find any panels that are in the same repair vain as the bulkhead tops. Really, I'm just looking at getting it through the dreaded mot, so pretty ain't an issue!! Once I've found / fabricated some I'll show you all how I got on.
Check back tomorrow for a masterclass in door repair!!
 
Before and after (okay, so it's a Series but you get the idea)

IMG_7877.jpg


IMG_8025.JPG
 
So, looks like it's going to be another cut, chop rebuild then! Thanks guys. I'll let you all know how I get on.
 
arc said:
Mine is a sykes pickavant one. The trick is to:
  • centre punch
  • Keep the replacable centres sharpened
  • Use lots of cutting oil
Miss out any of the above & thery're a pain in the *
Click to expand...
Cheers chap - I've still got to finish the Series bulkhead so there's gonna be more cutting/drilling/grinding/welding in the not too distant future.

Ian
 
GRATCH said:
Did you look at the first link in post #3 ?;)
Click to expand...

Nope...have now tho. I got my footwell from them and was impressed. But if i remember correctly, they didn't do door pillars at that time as they were just starting out. Would defo use them again.
 
You must log in or register to reply here.

Similar threads

chrisstdt
Galvanised bulkhead
Replies
18
Views
1K
shaynecm
S
Jbdisco
110 roof cracks
Replies
10
Views
684
dag019
dag019
F
Bulkhead Identification
Replies
4
Views
586
Wildefalcon
W
V
Repair Kit for Discovery 4 2010 Air Compressor - AMK type
Replies
10
Views
431
gstuart
gstuart
F
King Cab Advice
Replies
0
Views
418
foggy23
F