Tunelessblues
New Member
Yes i have a 19J but i'm ditching it for the more superior jap engine DL52.
Yes i have a 19J but i'm ditching it for the more superior jap engine DL52.
PembsLandy
Active Member
Looking forward to seeing this mod take place.
Tunelessblues
New Member
currymunster
Active Member
Fair play mate, I love all the work you have done so far - look forward to the good news - No hard feelings I hope !!!
Tunelessblues
New Member
Tunelessblues
New Member
Modifications for fitting this engine include:
N/s Footwell removal
Re-alinement of the Slave cylinder pipe
N/s Footwell removal
Re-alinement of the Slave cylinder pipe
Tunelessblues
New Member
Intercooler in place, i had to refit the radiator closer to the engine in order to fit the intercooler in front.
timtheenchanteruk
Well-Known Member
thats a chuffing big intercooler
Tunelessblues
New Member
Tunelessblues
New Member
Fitting a cut off switch today
Thanks for the prompt! Excellent thread. Just wish I had a tenth of that knowledge/skill
Tunelessblues
New Member
Thanks guys for your comments.
Well engine conversion is now complete other than a cambelt change and new fuel filter which i will be doing shortly, and maybe tidy the wiring up a little.
Well engine conversion is now complete other than a cambelt change and new fuel filter which i will be doing shortly, and maybe tidy the wiring up a little.
bigvinnie
Active Member
Just red this from start to finish wea ma jack and coke, again a cracking thread and the transformation is outstanding.......Again more inspiration for ma sell, just hope the bank balance allows....wish i could take mine of the road but as its ma daily run around its all work in ma lunch brake or outside the house when i get the time....keep it comming tuneless!
Tunelessblues
New Member
Hi Thanks.
Airfilter housing?? There isn't one at the moment!
I've just got a little cone filter on for now, you can see it between the intercooler pipes if you look at the engine bay picture.
some time later i will improve the airfilter and intake system, but the cone filter will do for now.
Tunelessblues
New Member
no idea on the make of the intercooler, sorry, they are on Ebay for around £130, i got mine second hand but unused for £60.
Tunelessblues
New Member
I fitted some more cosmetic pieces today.
I have the tread plate bug!
Fitted black kick plates to the bottom of the tub and front wing.
Then shiny side steps
I have the tread plate bug!
Fitted black kick plates to the bottom of the tub and front wing.
Then shiny side steps
