M

Maverick2518

Active Member

• Jun 18, 2019

• #1

hi all!

Could any of you fortunate people that have a parts book be able to tell me the proper name/number for the lower seal on the lower fold down rear door please. I have the van back with a cat flap upper.

That does make sense to me! Haha.

Mav

 

D

David Leech

Well-Known Member

• Jun 18, 2019

• #2

Is this it?.....

https://www.johncraddockltd.co.uk/l...l-for-doors-1954-58-and-tailgate-1954-84.html

 

D

David Leech

Well-Known Member

• Jun 18, 2019

• #2

.

 

Last edited: Jun 18, 2019

D

David Leech

Well-Known Member

• Jun 18, 2019

• #3

Sorry, Forum acting up a bit.....

 

Last edited: Jun 19, 2019

M

Maverick2518

Active Member

• Jun 19, 2019

• #4

David Leech said:

Is this it?.....

https://www.johncraddockltd.co.uk/l...l-for-doors-1954-58-and-tailgate-1954-84.html

Click to expand...

Thank you David!

Tailgate was the word I was looking for! Haha

 

D

David Leech

Well-Known Member

• Jun 19, 2019

• #5

Parts Page inserted into Post #3.....

 

steve2286w

Well-Known Member

• Jun 19, 2019

• #6

http://www.retroanaconda.com/landrover/


Have a look for the parts book and other useful info

 

M

Maverick2518

Active Member

• Jun 23, 2019

• #7

steve2286w said:

http://www.retroanaconda.com/landrover/


Have a look for the parts book and other useful info

Click to expand...

That is a very handy link, thank you!

 

M

Maverick2518

Active Member

• Jun 23, 2019

• #8

I ordered the rubber, thanks to the help on this thread. But I didn’t look at the rivet things they use until I came to fit it. 78321 are the ones I’m supposed to use, but they look very different to normal rivets. Do I need a specific tool to got them, is there a knack/trade secret at all?

Many thanks

 

steve2286w

Well-Known Member

• Jun 23, 2019

• #9

My rubber seal has a plate above and fixed with self tappers , I’m not sure if the part no you mention is for the rear body bolts shown in pic

 

M

Maverick2518

Active Member

• Jun 30, 2019

• #10

Thanks for the replies. The seal I have is as pictured, and I can’t really work out where it’s supposed to go haha.

 

Attachments

• 
  EF7729E1-50FD-46B0-BA36-8B21EC97E10A.jpeg

  231.8 KB · Views: 125

M

Maverick2518

Active Member

• Jun 30, 2019

• #11

 

steve2286w

Well-Known Member

• Jun 30, 2019

• #12

Looking at the part diagram above , I think it’s different to the safari door type where seal fits on back of tub, yours looks like it fits on tailgate to replace that black mess on pic, looks like it pop rivets on , if you cleana off the mess and place it in position and close tailgate check it closes and seals and if so pop it on

 

R

rob1miles

Well-Known Member

• Jun 30, 2019

• #13

Can we see the rivets?

 

M

Maverick2518

Active Member

• Jul 1, 2019

• #14

I’ve tried it in many varying ways and it always pushes the tailgate out a bit. But it is a new seal...and Brit part! But atleast it’s tight I guess. I agree with you Steve, it’s just the rivets the other side that threw me a bit. Not the normal rivets I use haha.