johndregg

Active Member

• Sep 1, 2017

• #1

ive got a V8 110 with a three pin fuel sender and I've managed to trash the petrol tank wiring loom and need a replacement. A quick search online brought up AMR 1493 which looks right but is for a two pin fuel sender. Any Petrol heads know the correct part number for the V8 loom?

 

alexc2701

Active Member

• Sep 1, 2017

• #2

Can you not just use some flex or multicore? And either replace the damaged section or wire it direct to the warning lights and fuel guage

 

johndregg

Active Member

• Sep 1, 2017

• #3

That was to be my last resort. I managed to earth a live after replacing the tank and melted one wire. Glad at this point still to have a car to be honest.

 

alexc2701

Active Member

• Sep 1, 2017

• #4

johndregg said:

That was to be my last resort. I managed to earth a live after replacing the tank and melted one wire. Glad at this point still to have a car to be honest.

Click to expand...

Use a multimeter to identify positively what wire is what and wiring diagrams.
Then if I was you I'd use a peice of flexi con with some flex in. What I've used to make a new glowplug loom for mine. Flexi con and appropriate guage coloured and sleeved cable. Be a fraction of the price and just as good if you do it properly and solder or crimp proper connections.
Goodluck with the electrickery! Caused me no end of headaches haha

 

mojo247

Active Member

• Sep 5, 2017

• #5

http://www.retroanaconda.com/landrover/parts_books/110/8_body_electrics_p667-740.pdf

If your still looking for a new one, page 692 onwards! I guess it depends on the model/year!