Pete1989

Member

• Mar 27, 2019

• #1

I thought it may be useful to log some of the modifications I've been doing to my Disco 2. Hopefully it will be of some use or interest to someone. This is how she was when I first got her. Only one owner from new other than me, and serviced at a landrover main dealer til the book was full.

 

Pete1989

Member

• Mar 27, 2019

• #2

The first change was to fit some steelys and BFGoodrich AT T-A in 285 75 r16. They where a little bit of a tight fit and needed some trimming of the will guards and front bumper part of the inner arch. There filling the arches a bit to much at the moment.

 

dieseldog69

Well-Known Member

LZIR Despatch Agent

• Mar 27, 2019

• #3

Very nice looking D2

You running spacers on there too?

 

Pete1989

Member

• Mar 27, 2019

• #4

Cheers.
No spacers but the wheels have some additional offset over standard, I carnt remember how much. Imthey where the minimum offset modular steel wheels from Paddocks. They keep the tyres just within the arches, so not too wide.

 

DanClarke

Well-Known Member

Full Member

• Mar 27, 2019

• #5

lovely looking motor.

 

Gregja

Active Member

• Mar 29, 2019

• #6

I love this, my Mrs has one in Kinversand too!

 

Last edited: Mar 29, 2019

Pete1989

Member

• Mar 29, 2019

• #7

Gragja are the spots on that standard fitment?

 

Pete1989

Member

• Mar 29, 2019

• #8

I fitted my winch and winch bumper today. I still need to trim a little more of the grill and move the bumper up a 1/2 inch or so.
I've got most of the wiring done, using an albright contactor in place of the warn solinoid pack. I still need to mount the winch romote socket in the grill and wire it up.

 

Attachments

• 
  20190328_102401.jpg

  369.5 KB · Views: 276
• 
  20190328_121135.jpg

  303.3 KB · Views: 302
• 
  20190329_161103.jpg

  476.9 KB · Views: 258
• 
  20190329_161051.jpg

  309.8 KB · Views: 315

Gregja

Active Member

• Mar 29, 2019

• #9

No I wired them myself using a relay and connecting them to the main beam.