paddocks1967
New Member
how can you get into car when key dosen't open door manually or of the fob,cheers pat.
paddocks1967
New Member
nice one,
paddocks1967
New Member
maybe a big giant f-cking hammer.
paddocks1967
New Member
p38
paddocks1967
New Member
there is only driver's door that work's with the key, and the fob wont work because the battery has been disconected,
paddocks1967
New Member
who's he
paddocks1967
New Member
nah only kiddin fanatic,what's a slim jim
http://en.wikipedia.org/wiki/Slim_Jim_(lock_pick)
or it may be possibe to back feed reverse light switch and with tool wind down window
or it may be possibe to back feed reverse light switch and with tool wind down window
moneypitRR
New Member
Hi i got into mine by using my thin fishing rod stand , so you need something about 2.5 ft long thin but not bendy etc . Pop off the top door to window trim and you can see down to the door lock mechanism i litterally just manouvered the mechanism pushing and pulling at the levers attached to the lock and finally hit the right one that released the door for me , took a bit of prodding but got in took about ten min .
paddocks1967
New Member
cheers for the reply moneypit,need to get something to try it,is there any way to pop the bonnet,cheers pat.
paddocks1967
New Member
doh, i would if i could but i cant.
Consider yourself lucky chap. On the RRS and Disco 3 there is no external lock you can put a key in visible at all. However on the passenger door under the small fixed part of the handle and totally out of sight to the average owner there is a very small slot just big enough so you can push a key blade in. This prises back a barb that releases the plastic cover, under which there is indeed a key slot to manually open the passenger door.
If you don't know this, a Brick can indeed seem very attractive
:hysterically_laughi:hysterically_laughi
If you don't know this, a Brick can indeed seem very attractive
:hysterically_laughi:hysterically_laughi
sofawizard
New Member
if you have a pin lock that stands above the door card you can use packing tape down the side of the door to pull it up
make a loop and hook it round the pin and tighten it up n pull it upwards
make a loop and hook it round the pin and tighten it up n pull it upwards
had to unlock mine before as door blew shut with the keys on the seat what i used was a metal coat hanger straightend out with the hook still on the end and went down between door and b post and lifted the button up job done unless the cars been superlocked then you are stuck
