jolly-109

Active Member

• Oct 3, 2015

• #1

Does anyone know a part number for the fuel filler pipe which joins the filler neck to the tank. I can only find two part numbers which are NRC2337 or 562662 neither of which are available?

Its a 1990 Range Rover Vogue TD

Any help much appreciated

 

jamesmartin

Well-Known Member

• Oct 3, 2015

• #2

try ntc1382

 

jolly-109

Active Member

• Oct 3, 2015

• #3

jamesmartin said:

try ntc1382

Click to expand...

No good for me I'm afraid, I forgot to mention mine has been modified at some point and requires a straight pipe with the same diameter at both ends (the larger diameter)
The same as the part numbers in the original post, but available

 

jamesmartin

Well-Known Member

• Oct 3, 2015

• #4

esr2834

 

jolly-109

Active Member

• Oct 3, 2015

• #5

That could be it, thank you

 

jolly-109

Active Member

• Oct 8, 2015

• #6

jamesmartin said:

esr2834

Click to expand...

That is too small sorry, I am looking for a straight section of fuel filler pipe with an ID of 75mm does anyone know of any suppliers

 

Mick Guilbert

Well-Known Member

• Oct 8, 2015

• #7

Are there any stainless exhaust makers near you? it may be cheaper to have a piece made.

 

jolly-109

Active Member

• Oct 8, 2015

• #8

Mick Guilbert said:

Are there any stainless exhaust makers near you? it may be cheaper to have a piece made.

Click to expand...

Not sure if there are but I am also unclear how this will help as I have to join a 3inch filler neck to the 3inch fuel tank inlet?

 

Mick Guilbert

Well-Known Member

• Oct 8, 2015

• #9

The guy who built the custom exhaust for my bike was able to stretch the tube diameter to the size I needed didn't know if the same could work for you?

 

jolly-109

Active Member

• Oct 8, 2015

• #10

Mick Guilbert said:

The guy who built the custom exhaust for my bike was able to stretch the tube diameter to the size I needed didn't know if the same could work for you?

Click to expand...

Ah, sorry Mick I have been unclear what a actual need is "hose" and not pipe it has to join two straight sections of pipe, sorry for the confusion.

 

Mick Guilbert

Well-Known Member

• Oct 8, 2015

• #11

No Problem hope you get it sorted.

 

E

EntropyUK

Well-Known Member

• Oct 8, 2015

• #12

There's plenty of retailers selling that type of hose just Google it. I had to find a 4" piece to replace a split intercooler hose but cannot remember the suppliers name. Also have you tried a boat chandlers as they have this sort of stuff on hand.

 

ukadamwest

Well-Known Member

• Oct 9, 2015

• #13

make sure that whatever pipe you use it is resistant to hydrocarbons.

 

E

EntropyUK

Well-Known Member

• Oct 9, 2015

• #14

I forgot to mention that, as a Google for 'fuel hose id 75' pulled up lots of returns. Have you asked a local garage where they would go? What about a scrappie they may have something that they would almost give away.