NiallRussell said:

Want to replace the UJ's (or at least have some spares ready to go)

1985 One Ten that had a 300tdi shoved into it, but not sure how much of the drive train is original or not, (rear diff is salisbury type).

I'm a bit confused as to different sizes, types, etc.

Is there a number I can read off the prop shaft or something to give me some idea?

lastly what manufacturer would people recommend.

Click to expand...

NiallRussell said:

Want to replace the UJ's (or at least have some spares ready to go)

1985 One Ten that had a 300tdi shoved into it, but not sure how much of the drive train is original or not, (rear diff is salisbury type).

I'm a bit confused as to different sizes, types, etc.

Is there a number I can read off the prop shaft or something to give me some idea?

lastly what manufacturer would people recommend.

Click to expand...

james6546 said:

Hardy spicer are the best from what I have heard, but not cheap.

I think the easiest way to know what UJs you want is to measure the distance across the existing ones.

Click to expand...

NiallRussell said:

Distance from which points? End to End? or width of ends?

Click to expand...

jamesmartin said:

from one cap to the other it will be obvious if 80 plus mm is too wide to fit in yoke

Click to expand...