nengelbrecht6 · Mar 23, 2016

I am after a part number for the bolts to mate up the LT95 bellhousing to a 3.5, if anyone has it. Previous owner used studs instead of bolts in a couple places and I am looking to correct that and use bolts all around. Studs made it a pain to separate the engine from the gearbox.

discool · Mar 23, 2016

I've never need them, but if I did I would look in the parts book, so try this link. http://www.allbrit.de/NAV.cfm?SPRACHE=EN&PAGE=452250

jamesmartin · Mar 23, 2016

bh506161l x 8,3/8 unc

nengelbrecht6 · Mar 23, 2016

discool said:
I've never need them, but if I did I would look in the parts book, so try this link. http://www.allbrit.de/NAV.cfm?SPRACHE=EN&PAGE=452250

I wish it was that easy. I can't find the correct part listed in the parts catalog. I've been through the parts catalog using a similar link to what you provided (for Defender it's http://www.allbrit.de/NAV.cfm?SPRACHE=EN&PAGE=338364). Under gearbox and bellhousing, it lists the bolts to attach the bellhousing to the gearbox, but not for the bellhousing to the engine.

nengelbrecht6 · Mar 23, 2016

jamesmartin said:
bh506161l x 8,3/8 unc

As usual, you have come through! Thank you so much.

wammers · Mar 23, 2016

nengelbrecht6 said:
I wish it was that easy. I can't find the correct part listed in the parts catalog. I've been through the parts catalog using a similar link to what you provided (for Defender it's http://www.allbrit.de/NAV.cfm?SPRACHE=EN&PAGE=338364). Under gearbox and bellhousing, it lists the bolts to attach the bellhousing to the gearbox, but not for the bellhousing to the engine.

http://www.rimmerbros.co.uk/Item--i-BH506161

nengelbrecht6 · Mar 23, 2016

wammers said:
http://www.rimmerbros.co.uk/Item--i-BH506161

Thank you!

nengelbrecht6

Member

discool

Well-Known Member

jamesmartin

Well-Known Member

nengelbrecht6

Member

nengelbrecht6

Member

wammers

No longer with us, RIP

nengelbrecht6

Member

Similar threads