Have never had any problems untill this week. Bought all new suspension.. Shackels, bolts, gas shocks and grey parabolics. After spotting that people have had problems with there grey parabolics I unraped mine to check them to find copper grease and rust particles in the spring bushes (fitted and returned?) and the paint looked like it had been rubed off on the front and rear curled end mounts which is apparently a common problem with the britpart springs. I have layed an origional leafsprint on its side with a para on top and pushed a bolt through both bush holes to line them up. Bush holes spot on but the curled ends are approx 5/7mm higher (closer to chassis) and 7/10mm longer at each end. I am calling them tommorow and returning them shotly after and then calling Rocky Mountain for a good set of springs. I have been shopping with paddocks for a couple of years now and am not at all impressed. Unless they have a good reason tommorow I shall no longer be a customer of theirs. Most dissapointing but I will update you tommorow.
Oh and by the way... I know the above parts are series 3 but I have a Disco as well so there!