C

carper10

Member

• Aug 30, 2020

• #1

hi has anyone got a colour pic of the wire the connects the loom to the first socket mine has two sockets what has happen is my window has caught the wire an pulled the wires out

 

gold rover

Well-Known Member

• Aug 30, 2020

• #2

Welcome.

 

C

carper10

Member

• Aug 30, 2020

• #3

i know i have 2 just need a little help

 

RangeRoller dt

Well-Sprung Member

• Aug 30, 2020

• #4

Il try again,

Welcome

 

RangeRoller dt

Well-Sprung Member

• Aug 30, 2020

• #5

If you look at the metal channel going around the outside of the door there is little plastic pips poking through (might be hidden by foam bit)
The connectors are on the other side of them

I posted a photo of this few weeks back but can’t find the pics now

 

DanClarke

Well-Known Member

Full Member

• Aug 30, 2020

• #6

I will find you a picture of the plugs and what colour wire goes where.

Is this it? Top pic is the older 2-plug layout. Bottom one is the later single plug.

These pics came from elsewhere.

 

Last edited: Aug 30, 2020

RangeRoller dt

Well-Sprung Member

• Aug 30, 2020

• #7

Dan.....

This is the place mate

 

RangeRoller dt

Well-Sprung Member

• Aug 30, 2020

• #8

RangeRoller dt said:

Point for Alan
View attachment 215880
Someone’s been in here (with a hatchet by looks of it) taped cables up but fell off. Wires catching in window mechanism.

Seem in one piece though, have a white unconnected connector with 4.8v going through it can’t see where it would go, then a black wire from that loom with a taped join going to the door mechanism?
View attachment 215888

Click to expand...

Photos attached ^^^ (click the green)
Mine is early so only has one.

 

Henry_b

Think outside, no box required.

• Aug 30, 2020

• #9

Download Rave and look at the wiring diagram for the latch..

I'd post a pic of my wires, but i have the latter model with the single plug.

 

C

carper10

Member

• Aug 31, 2020

• #10

DanClarke said:

I will find you a picture of the plugs and what colour wire goes where.

Is this it? Top pic is the older 2-plug layout. Bottom one is the later single plug.

These pics came from elsewhere.
View attachment 218224

Click to expand...

yes but can i need both ends as i have wires out of both ends of the top one mine is a 6 pin and both sides please

 

DanClarke

Well-Known Member

Full Member

• Aug 31, 2020

• #11

carper10 said:

yes but can i need both ends as i have wires out of both ends of the top one mine is a 6 pin and both sides please

Click to expand...

Hmmm....take the other door panel off and get the clues from there?
Download Rave and take a look for yourself?
For some unknown reason RAVE no longer runs on any of my PC's the Adobe app just bugs out.

 

RangeRoller dt

Well-Sprung Member

• Aug 31, 2020

• #12

You need the old version to read it usually. Looks like it’s updated it off.

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

• Sep 1, 2020

• #13

carper10 said:

hi has anyone got a colour pic of the wire the connects the loom to the first socket mine has two sockets what has happen is my window has caught the wire an pulled the wires out

Click to expand...

That's the older model like mine. Smaller plug is single black wire. Wires should be clipped in. One of my old threads has pictures.