P

Paul9399

Member
Hi I have just purchased a P38 2000 RR..... the air suspension has been removed and coils and springs fitted... I have just started getting the EAS fault warning and 35 mph max warning.... I've checked fuses and replaced the air suspension overide module... Can clear the fault withT4 no fault codes show but the warning returns after a short while.... Any suggestions or advice greatly received thanks
 
IMG_20210903_101934_4~2.jpg
 
kermit_rr said:
Hi and welcome
Sorry to hear your steed has been castrated :(
Click to expand...
Yeah thinking of reinstalling all the gubbins are still there and although it's 20 years old... Its only done 45k....it would be nice to have it all original.... Just hoping for a fix to stop the bleeping cheers
 
Could just be a bad connection somewhere so it doesn't always see the override?
Unplug the beeper :D
 
The system isn't really that hard, so long as you can understand that it's only compressed air and not some magic fairy dust
 
Paul9399 said:
Could it be a relay?
Click to expand...
There's a relay in the main fusebox, they can go bad, swap with another and see if the fault moves.
I'm guessing there was a fault to cause the PO to put it on coils, which could have burnt the relay etc
 
kermit_rr said:
There's a relay in the main fusebox, they can go bad, swap with another and see if the fault moves.
I'm guessing there was a fault to cause the PO to put it on coils, which could have burnt the relay etc
Click to expand...
Hi sorry for delay.... Just looked that relays not there.... I'm presuming it's never been there and fault has only come on recently... So any other tjoughts
 
Your override isn’t working. EAS relay 20 in engine compartment fuse box should be removed.

Should say ‘beep beep beep EAS manual’. 35mph Max means its aware the EAS is still there and recognises fault.

There should be a (5A?) fuse on the overide probably that. Depends how it was done. Worst method is if they chop the becm connections that’s asking for trouble.

Welcome to the palaver ;)
 
Thanks... The in line 5 amp fuse is ok.... Its a new overide so I'm really confused now?... Anybody else any ideas I'd be really grateful.... Hoping for a quick fix before I put the air suspension back on..
Thanks
 
You must log in or register to reply here.

Similar threads

P
EAS
Replies
4
Views
426
Paul9399
P
O
03 L322 EAS ECU Can bus fault / ABS temp system deactivation
Replies
1
Views
274
oldradiotech
O
V
Discovery 4 Codes not found - Help
Replies
4
Views
608
Vonnie
V
I
Fauls after reading with GAP IDD Tool - which one are 'real'?
Replies
19
Views
578
invisible999
I
A
Discovery 3 Air Suspension Red Fault Light
2
Replies
22
Views
3K
sierrafery
sierrafery