vilguy

Do'er of stuff and the like
Could anyone point me in the direction of a source of P38 rubbing strip clips?

ive searched and searched and I am probably using the wrong wording.
 
Could anyone point me in the direction of a source of P38 rubbing strip clips?

ive searched and searched and I am probably using the wrong wording.

BTR2095, BTR691, BTR2923. Put these numbers in to Rimmer Bros search.
 
ah maybe the clips on the rubbing strips only come with the strip itself. Doh.

cheers anyway wammers
 
Now I know it's not original, but you can buy stuff called "trim tape" for this job. It's essentially double sided sticky foam, you cut to length stick it on, and stick your trim on top. I've used it on door rubbers and all sorts, and it's worked well for me.

eBay do it.
 
tapes a bodge :p

i may just buy a second hand rubbing strip to rob the clips off of. i only need about 5
 
Has anyone got any spare nylon rubbing strip clips that they don't want ? The ones that fit into the stainless steel groove in the back of the rubbing strip ?
 
Can't find any separate clips on Microcat. Rubbing strips are pretty expensive. :)
Old thread I know - clips not available separately - come fitted to the rubbing strip. You can prise them out of the rubbing strip without breaking them but fitting them to another strip is impossible and you will never get them out of the bodywork without breaking them if they become detached from the strip when you are removing it. Unless you remove the interior trim panels and push them out from the inside. I ground a notch out of the lower stainless steel lip where a clip does not locate and then slid them all in. I think at the factory they must slide them into the groove before they glue the end cap on.
 

Similar threads