tomcat59alan said:
Run out of booze? you will drink anything daan souf. Mind you fish tank water probably has more taste to some of the flat gnats p*ss I have had to endure down there. I was glad when I'd had enough :D:D:D
Click to expand...
Not if the tube is transparent , do really think I'm that stupid lol
 
tony2 said:
Take the O/S headlamp out, 2 bolts 2 nuts and 2 plugs. Good access and your above the pumps so no wet armpits.
Click to expand...
And if the bolts are rusted, it will destroy the bolt mountings in the plastic. Acess is easy enough from underneath.
 
Datatek said:
And if the bolts are rusted, it will destroy the bolt mountings in the plastic. Acess is easy enough from underneath.
Click to expand...

They usualy are , but I don't want to say that's why also when you look at second hand headlights they have always got the trim on as the small bolts snap
 
Appreciate what your saying about the two nuts, I was lucky with mine.
I am a great believer in Preventative Maintenance so anything I take off my P38 gets treated to Copper Grease when refitted ready for the next time, and there will be a next time. :amen:
 
Had the same problems on my DSE. Turned out to be the two little non-return valves. Both of them were gummed up with black goo!! Bought some off eBay, they are pretty universal and hey presto! working washers. Been through the pain of looking at the pumps and getting very wet in the process but did take the opportunity to clear all the black stuff out of the washer tank.
 
You must log in or register to reply here.

Similar threads

A
P38A Rear washer jet pipe 'lost' !
Replies
1
Views
285
cornishboater
cornishboater
300bhp/ton
P38A Vale block removal??
Replies
5
Views
700
Rubberknees
Rubberknees
Officerdibble
Rear washer issue
Replies
2
Views
609
Officerdibble
Officerdibble
F
P38A Starting issues.
Replies
7
Views
563
kermit_rr
kermit_rr
B
Underside protection on Discovery 1
Replies
10
Views
2K
lynall
L