D

day6480

New Member

• Oct 4, 2014

• #1

I've just changed my engine in my p38 dse auto 2 a different engine and manual box changed the gearbox loom ecu. When I go 2 Turn the: key just get a click under driver seat and in fuse box.swap the whole fuse box, starter. Any1 help

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Oct 4, 2014

• #2

Loss of sync....??

 

D

day6480

New Member

• Oct 4, 2014

• #3

Not sure never had any trouble got a bbs sync mate plugged that in but no good. Does seem like that could b the problem

 

brianp38dse

Well-Known Member

• Oct 4, 2014

• #4

did you change engine ecu as i believe that the becm need setting to new one ?

 

D

day6480

New Member

• Oct 5, 2014

• #5

No just the 1 4 the gearbox. Been told it should run

 

zzr1200

Well-Known Member

• Oct 5, 2014

• #6

Did you remove an early or late engine and which engine/gearbox combo are you trying to install as there be setting's problems in the ecu's, probably.

Do you still have a autobox ecu fitted and have the correct engine ecu (petrol/diesel/early/late...) ecu???

 

Last edited: Oct 5, 2014

D

day6480

New Member

• Oct 5, 2014

• #7

Not sure on year of engine I bought a truck with a engine and manual box in and running. Put it into another but had 2 change the gearbox loom and ecu under passenger seat so the low box switch was fitted

 

wammers

No longer with us, RIP

Donater

• Oct 5, 2014

• #8

You will have to fit a manual transmission engine ECU and sync it to the BECM.

 

D

day6480

New Member

• Oct 5, 2014

• #9

Ok thanks for the help will try and get that done and hopefully fixed