P

Plasticman

New Member

• Jul 2, 2021

• #1

Hi everybody, i´m new here and have a issue. I have the "book" on may P38 Hevac and I read with the Nanocom fault code (53) right blend door motor stall PO Fault Type = Current. Can you help before I start dismount? Thanks

 

Attachments

• 
  207975983_502498214197919_3638076267763735744_n.jpg

  135.9 KB · Views: 95

kermit_rr

Very

Full Member

• Jul 2, 2021

• #2

what values do you get for left and right blend motors? check with both sides set to HI and again at LO

 

P

Plasticman

New Member

• Jul 2, 2021

• #3

kermit_rr said:

HI and again at LO

Click to expand...

I Will check. Thanks.

 

T

tomcat59alan

Well-Known Member

• Jul 2, 2021

• #4

kermit_rr said:

what values do you get for left and right blend motors? check with both sides set to HI and again at LO

Click to expand...

Good call, don't the right and left show arse about face on Nanocom?

 

kermit_rr

Very

Full Member

• Jul 2, 2021

• #5

I don't think so on mine, but never actually ran trial and error tests.
It helps to know if the dodgy one moves at all, stalls at one end other the other or at a mid point

 

fucmeitsandy

Well-Known Member

• Jul 2, 2021

• #6

I had my blend motors changed because one of the three was stuck .
When I looked inside the stuck one it was stuck in a big old lump of grease .
I still wonder if I should have tried forcing that motor from the plug on the hevac unit ?
Might be worth doing the o-rings on the heater pipes while you're in the area.

 

pete12345

Well-Known Member

Full Member

• Jul 2, 2021

• #7

I’ve you got it all stripped out well worth doing the heater o rings

 

Rubberknees

Well-Known Member

Full Member

• Jul 2, 2021

• #8

pete12345 said:

I’ve you got it all stripped out well worth doing the heater o rings

Click to expand...

Or replace heater matrix for Audi one like I did . Does away with O ring problem

 

kermit_rr

Very

Full Member

• Jul 2, 2021

• #9

Rubberknees said:

Or replace heater matrix for Audi one like I did . Does away with O ring problem

Click to expand...

Or do what the PO did on mine and use so much bath sealer there's no room for coolant

 

Rubberknees

Well-Known Member

Full Member

• Jul 2, 2021

• #10

kermit_rr said:

Or do what the PO did on mine and use so much bath sealer there's no room for coolant

Click to expand...

Did you get much heat given off from it?

 

pete12345

Well-Known Member

Full Member

• Jul 3, 2021

• #11

+1 on the Audi matrix

 

Marshall8hp

Well-Known Member

• Jul 3, 2021

• #12

+2 on the Audi core