Datatek
Well-Known Member
The procedure differs according to year. Have you tried the owners manual?
Some MY's need 4 turns to the Left first....(Lock)...
Then enter the first digit by turning to the right and back to centre the req. number of times...
Then Left...for the Second No
Then Right....for the Thrid No
Then Left....For the Forth No
Then finally Right to unlock the door...put key in ignition and start the car!!
Then enter the first digit by turning to the right and back to centre the req. number of times...
Then Left...for the Second No
Then Right....for the Thrid No
Then Left....For the Forth No
Then finally Right to unlock the door...put key in ignition and start the car!!
lil4399
Active Member
mine has issues taking the code. Start with the code e.g. 2 2 1 3 turn to lock the key twice - if the lights flash each time it is working. if it does not flash, leave for 10 mins then start with four turns to lock, then put the code sequence in.
make sure you turn the key and return only to the centre position, not too far over or it will register you putting the wrong code in.
keep trying, mine took around 20 goes last time
make sure you turn the key and return only to the centre position, not too far over or it will register you putting the wrong code in.
keep trying, mine took around 20 goes last time
Grit Valve
2000 4.6 Vouge
+1 on early one's without passive ingnition barrel
Only 1 lock turn not four to start
No need to wait, after two fails open door and close it, you have three more tries. Keep doing that and there is no waiting.
