A

azzd

New Member

• Oct 22, 2010

• #1

hi all just noticed my front injector is leaking where it goes into the head can i just tighten it down or does the engine have to be hot/cold thanks for looking.

 

wammers

No longer with us, RIP

Donater

• Oct 23, 2010

• #2

azzd said:

hi all just noticed my front injector is leaking where it goes into the head can i just tighten it down or does the engine have to be hot/cold thanks for looking.

Click to expand...

How do you know it's leaking? If you have a puddle of diesel in there it will be from the spill pipe not the injector.

 

A

azzd

New Member

• Oct 23, 2010

• #3

i can see small bubbles round the bottom of the injector

 

Datatek

Well-Known Member

• Oct 23, 2010

• #4

That's probably the diesel boiling. As Wammers said, if you have a puddle of diesel round the injector, it's probably the leakoff pipe leaking.

 

A

azzd

New Member

• Oct 23, 2010

• #5

went out this morning started from cold managed to tighten the injector with a slight turn it was leaking round the injector now sorted and changed all pipes from injector to injector i think thats sorted it for now thanks for the info

 

C

cherryredbenj11

New Member

• Jan 12, 2014

• #6

azzd said:

went out this morning started from cold managed to tighten the injector with a slight turn it was leaking round the injector now sorted and changed all pipes from injector to injector i think thats sorted it for now thanks for the info

Click to expand...

Sorry to bring up and old thread but i have the exact same problem with my dse. What pipes did you replace? cheers.

 

Datatek

Well-Known Member

• Jan 12, 2014

• #7

cherryredbenj11 said:

Sorry to bring up and old thread but i have the exact same problem with my dse. What pipes did you replace? cheers.

Click to expand...

The mesh covered rubber ones the go from injector to injector, don't forget the one that goes to the FIP.. Do not use silicone tube as a replacement. You can get the correct stuff on the internet (Ebay)

 

C

cherryredbenj11

New Member

• Jan 13, 2014

• #8

I have noticed that my injector seems to be moist on the top. The metal tube?

 

Datatek

Well-Known Member

• Jan 13, 2014

• #9

cherryredbenj11 said:

I have noticed that my injector seems to be moist on the top. The metal tube?

Click to expand...

Check the union is tight.

 

wammers

No longer with us, RIP

Donater

• Jan 13, 2014

• #10

cherryredbenj11 said:

I have noticed that my injector seems to be moist on the top. The metal tube?

Click to expand...

If you have a weep from the union don't just tighten it, knock it back first then nip it up.