R

roddy4

New Member
right i have taken off hot start fix and fuel is back up to 25 ish mpg
when you stop the truck and it is warm if i try to start it within 30 seconds it will fire up no problem,if i leave it say 2 minutes it can take up to 20 turns before it fires,i think it could be fuel draining back to the tank,i have no fuel leaks,
i wouldn't mind trying an injector upgrade,what is available for the p38?
i think i have a leaking injector as well,(or 6)
 
roddy4 said:
right i have taken off hot start fix and fuel is back up to 25 ish mpg
when you stop the truck and it is warm if i try to start it within 30 seconds it will fire up no problem,if i leave it say 2 minutes it can take up to 20 turns before it fires,i think it could be fuel draining back to the tank,i have no fuel leaks,
i wouldn't mind trying an injector upgrade,what is available for the p38?
i think i have a leaking injector as well,(or 6)
Click to expand...
will look at some different injectors.
 
I had fitted a hotfix previously and found al sorts of problems.. when I inspected the installation I found that the blue connectors had not made correct contact as needed so ended up cutting away the insulation to allow correct connection. I also picked a thicker earth wire to connect to.

I would refix but take time to fix properly.
 
You can fit a simple push button switch to activate the glowplugs operated from the cab. Someone did it and posted on here. If you are getting 25ish mpg, there is not much wrong with your injectors.
 
Just FYI but I located a real expert on diesel injection systems, particularly Bosch and they fixed the hot-start problem. They cleaned injectors I think and adjusted some setting on pump. They said it has 3,6,9 setting and it was on 3 and they moved it to 6 as I understood - they were speaking Czech so it was not easy to understand - just shows you don't need to start re-wiring your car to get it sorted and risk fuel economy. BTW: My P38 has done 280,000Kms.
 
I thought there was a post a few days ago about fixing the hot start problem by replacing the ignition relay? Or maybe I dreamt about it.....
 
Canyon said:
I thought there was a post a few days ago about fixing the hot start problem by replacing the ignition relay? Or maybe I dreamt about it.....
Click to expand...

ignition relay?that is for the diesel
and that cures the hot start prob
well that would be cheap enough
missed that thread/
 
You must log in or register to reply here.

Similar threads

B
P38A Mistery problem
Replies
4
Views
398
Grrrrrr
Grrrrrr
F
P38 DSE loss of power when driving
2
Replies
29
Views
1K
RangeRoller dt
RangeRoller dt
K
P38 2.5TDI won't start
Replies
8
Views
662
Kelvin'D-MiC'
K
J
P38 DSE Auto intermittent lack of power after vehicle has been hot
Replies
8
Views
438
brianp38dse
brianp38dse
Louis2.5DSE
P38A P38 DSE fires but won't start
2 3
Replies
58
Views
5K
BDC
B