ronnierix

ronnierix

Active Member
Hi guys.
So today I started to play with the car. The battery was flat so dealt with that and got some life into her.

I had all the windows not set faults so I cleared them by putting them down and back ect.

literally the second they were all “set”

I’ve had a gearbox fault flash up and a traction failure.

any ideas .?

thanks in advance.
 
Thanks Marjon.
That’s defiantly the case. The battery’s seen better days And has a drain issue somewhere I just charged it enough to get the windows closed and that’s how it all started.

I’ll pop a brand new one on next weekend and see what’s what.
 
In honesty I think I need to work out where the drain is before replacing the new one as I’d like to charge the new one pop it on and it keep a charge for a while lol.
 
Datatek said:
Do the BECM sleep test. If the BECM is not going to sleep, odds on it's the RF receiver keeping it awake.
Click to expand...
I’ve tried searching BECM sleep test for a guide on how to conduct it but couldn’t find anything. Can anyone help ?

thanks as always.
 
if you can check out youtube ,theirs a few on there do a sleep test ;) also called battery drain test ...;)
 
You must log in or register to reply here.

Similar threads

feyniriel
Gearbox fault P38?
Replies
3
Views
844
Grrrrrr
Grrrrrr
ar1g3
P38A P38 rattle at idle
2
Replies
26
Views
3K
roythebus
R
N
P38 abs / traction fault.
Replies
4
Views
1K
Neil.ms
N
V
Range a rover P38 Gearbox power solenoid fault
2 3
Replies
44
Views
4K
Datatek
Datatek
02Disco2
Disco 2 Abs & TC lights but no fault codes
Replies
1
Views
240
sierrafery
sierrafery