moatmeister said:

Very helpful thankyou.

I will get the seat out tomorrow or saturday, have a go and report back,

Click to expand...

The spray coating for the boards is called "Conformal Coating"

moatmeister said:

Tried drying out the BECM, no improvement!

Do you have to take the seat out to properly access the BECM?

Anyone in staffordshire shropshire or the west mids with nanocom etc and BECM experiance fancy having an initial look before anything gets worse please??

Click to expand...

No need to take the seat out of the car-tip the seat back and remove underseat connectors . Just remove the three M6 nuts ( 2 at the front + 1 at the back) and the pozidrive holding the heater duct to the lid. Disconnect the battery Neg. lead and then disconnect the Becm power feed cables (M6 captive nuts) followed by all the multi-pin connectors. Should take no more than 15 -20 mins. tops.

wammers said:

Hiya John you're not dead then.

Click to expand...

:behindsofa:

Hiya Tony...Nah, just lurking in the background keeping my beady eye on yourself and Keith :smokin::smokin::fencing::fish::monitor_punch::hysterically_laughi