Bern768

Well-Known Member

• Oct 6, 2021

• #1

Does anyone know if any extended brake hose kits are available for the late p38's I ordered one kit that was for all models but they only fit up to 1996 and the rears are done in two halfs per side and mine is a longer single Flexi each side ?

 

brianp38dse

Well-Known Member

• Oct 6, 2021

• #2

What year is yours, early cars had the rear brake pipes come down from the axle in the center up to about 96 then they all had a short flexi each side and one to drop down to the axle each side

 

Bern768

Well-Known Member

• Oct 6, 2021

• #3

Mine is 2001 and the setup is completely different to that will take a picture of it later but the only has one Flexi per side

 

300bhp/ton

Well-Known Member

• Oct 6, 2021

• #4

https://www.jgs4x4.co.uk/range-rover-p38-2-extended-brake-hose-kit-goodridge/

Or you can use the fronts from the 'other' kit (Britpart I assume). They are a bit long, but can be used on the rear if you secure them. Then get some more fronts for the front.

 

300bhp/ton

Well-Known Member

• Oct 6, 2021

• #5

In fact, I wonder if you could use a standard front line on the rear....

 

brianp38dse

Well-Known Member

• Oct 6, 2021

• #6

If its different to the pic in the box someone has altered the set up

 

Flossie

Well-Known Member

• Oct 6, 2021

• #7

You should have 4 flexi's at the rear, 2 short(about 6") and 2 long going to the calipers. The short ones are not obvious to see.

 

Bern768

Well-Known Member

• Oct 8, 2021

• #8

Sorry for the rather late reply been a rather hectic few days ,it is like the one in the box picture without the lines running across the axle , the problem I seem to have found is the old type extended kits are readily available but the one for the later set up is not,