P

paddy rover

New Member
hi / looking for some help/info
I got a p38 4.0 petrol range rover from e bay with no engine
it was taken out for a kit car by last owner.
I have a recon v8 3.9 out of my r rover classic which now runs 2.8 Isuzu diesel.
can I fit this in to the p38 it looks like it will fit mechanically but was worried
about the becm. if I use alternator etc. will it work ?
any body done this? thanks
 
3.9 does have an ECU...I think it is the 14CUX Lucas jobby....

Whilst if the original Engine ECU is in place, the BeCM will register this and be 'OK' but the BeCM needs a 'engine running' signal to perform other functions etc....also the EAS needs an Engine running signal from somewhere!
 
thanks. my 3.9 v8 does have a cux 14 ecu but it has been [ jerry rigged] to run stand alone .
before I got it. they said they did it from a you tube video and it does run ok.
will the becm be fooled if I connect ancillary's from p38 on to the 3.9.
the eas . has been already nobbled before I got it with separate valves pumped at normal level.
it has some kind of harness fitted to fool the computer. paddy
 
paddy rover said:
thanks. my 3.9 v8 does have a cux 14 ecu but it has been [ jerry rigged] to run stand alone .
before I got it. they said they did it from a you tube video and it does run ok.
will the becm be fooled if I connect ancillary's from p38 on to the 3.9.
the eas . has been already nobbled before I got it with separate valves pumped at normal level.
it has some kind of harness fitted to fool the computer. paddy
Click to expand...
Which ancillaries?
 
What age is the 4.0? The GEMS engines were a lot more keyed in to the air-con etc. The diesel and THOR from later models were more of a cut and shut job from BMW (so easier).

If you look on RangeRovers.net there is a thread from a guy slipping a 6.2 GMC engine in there (LS1, I think) so it is possible. Just need to check how he fooled the BECM.
 
hi my 4.0 p38 is 1998 I thought if I connect p38 alternator oil temp etc. it will think it still has gems engine
as 3.9 has own ecu stand alone set up . just to connect these to p38 keep it quiet?
just a thought will gear box work as still original ?
thanks paddy
 
Gearbox ECU talks to the Engine ECU to demand a torque reduction while the shift happens.....
 
thanks for all reply's
looks like I will look out for a p38 gems 4.0 engine . sounds like to much hassle
to fit the 3.9 . it s not to straight forward as thought.it might be .never mind I can keep the 3.9 in case my other classic v 8 3.9 decides to go out with a bang.
thanks again for help/reply's
paddy
 
paddy rover said:
thanks for all reply's
looks like I will look out for a p38 gems 4.0 engine . sounds like to much hassle
to fit the 3.9 . it s not to straight forward as thought.it might be .never mind I can keep the 3.9 in case my other classic v 8 3.9 decides to go out with a bang.
thanks again for help/reply's
paddy
Click to expand...
Better looking out for an M51:cool:
 
You must log in or register to reply here.

Similar threads

ar1g3
P38A P38 rattle at idle
2
Replies
26
Views
2K
roythebus
R
P38 guy
P38 evap charcoal canister
Replies
2
Views
384
P38 guy
P38 guy
ukadamwest
P38A Farewell to another P38.. or hello ?
Replies
18
Views
2K
Grrrrrr
Grrrrrr
Radar1946
P38A Mobile mechanic near Lichfield, Staffs.
Replies
10
Views
333
Rubberknees
Rubberknees
F
P38A Starting issues.
Replies
7
Views
667
kermit_rr
kermit_rr