D

Dave123456

New Member

• Mar 2, 2021

• #1

Hi all
I've recently bought a p38 2001 4 ltr v8 it was working fine until Friday the key fob stopped working so unlocked with key then when I went to start, came up with alarm fault engine disabled, have got eka code worked fine started up all good but if you leave it locked or unlocked when you come back to it you need to use eka code as it forget the fobs so please any suggestions where to go first.

 

kermit_rr

Very

Full Member

• Mar 2, 2021

• #2

Does the red light come on the fob?
You might need to resync fob to the car

 

D

Dave123456

New Member

• Mar 2, 2021

• #3

Yes red light does come on and all locks and unlocks fine on fob.

 

kermit_rr

Very

Full Member

• Mar 2, 2021

• #4

Ok that's a good start. It will immobilise after 30secs then you'll need to press unlock again

 

D

Dave123456

New Member

• Mar 3, 2021

• #5

Hi how do I go about resync keys to car can I do it with a nanocom? If so were is best one to get and which model.

 

kermit_rr

Very

Full Member

• Mar 3, 2021

• #6

put the key in the door, press and hold the lock button. turn and hold in the lock position until the light stops flashing. repeat with the unlock button and turning to the unlock position
you might need to repeat a few times but you know its done when the central locking activates

 

D

Dave123456

New Member

• Mar 3, 2021

• #7

Thankyou I will give it a go. I know nothing about my p38 apart from its great to drive and its costing the earth to keep on road. Thankyou again

 

kermit_rr

Very

Full Member

• Mar 3, 2021

• #8

you're actually rotating the planet under the p38 thats why it costs so much

 

D

Dave123456

New Member

• Mar 3, 2021

• #9

It does feel like it at times

 

pete12345

Well-Known Member

Full Member

• Mar 3, 2021

• #10

Did the key in the door work

 

Gunnerhavesome

Well-Known Member

Full Member

• Mar 4, 2021

• #11

kermit_rr said:

put the key in the door, press and hold the lock button. turn and hold in the lock position until the light stops flashing. repeat with the unlock button and turning to the unlock position
you might need to repeat a few times but you know its done when the central locking activates

Click to expand...

For that year model it should also sinc through the ignition barrel. If i am correct as mine is 2000 model and does.

 

kermit_rr

Very

Full Member

• Mar 4, 2021

• #12

Gunnerhavesome said:

For that year model it should also sinc through the ignition barrel. If i am correct as mine is 2000 model and does.

Click to expand...

it should, if the coil works and the antenna hasn't been unplugged
i've had to do it on mine in the past, even though mine is a 2000

 

D

Dave123456

New Member

• Mar 4, 2021

• #13

Sorry not home to try till the weekend. I will let you know then.