J

jagman9965

New Member
Hi I have a p38 range rover 2.5 DSE and I am in need of a front diff, both half shafts and a front prop what options do I have?
Can I fit any p38 diff i.e. of a 2.5 4.0 or 4.6 assuming all the parts came of the same vehicle and or the front and rear diff interchangeable assuming the splines or the same
Many thanks neil
 
If the front diff has failed, check that the VCU has not seized when you fit the replacement.
 
I remember reading somewhere that the 4.6's had heavier duty front and rear diff's - anyone know if this is true or a load of bull?!
 
MikeV8SE said:
I remember reading somewhere that the 4.6's had heavier duty front and rear diff's - anyone know if this is true or a load of bull?!
Click to expand...

4.6 2pin front diff 4 pin rear diff. All others 2 pin front and rear.
 
MikeV8SE said:
Why only a 4 pin in the rear diff, not both I wonder?
Click to expand...

I read somewhere that it was to do with the additional strain imposed by the traction control. The 4.6 apparently gained a 4 pin front diff when they added 4 wheel traction control.
 
were getting side tracked can i fit a front axel to my 2.5 DSE 1997 from any p38 4.0lt or 4.6 not bothered if its 2 or 4 pin
 
You must log in or register to reply here.

Similar threads

ar1g3
P38A Tips for torquing prop shaft bolts?
Replies
16
Views
2K
romanrob
R
B
P38A Mistery problem
Replies
4
Views
290
Grrrrrr
Grrrrrr
300bhp/ton
P38A Vale block removal??
Replies
5
Views
703
Rubberknees
Rubberknees
I
P38 BeCM locked?
Replies
8
Views
489
pwood999
pwood999
H
Classic Hello
Replies
7
Views
751
Rubberknees
Rubberknees