T

tmb180

New Member

• Jun 5, 2014

• #1

Can anyone out there offer any help, 1999 4.6L . Locks on remote fob but by double clicking does not deadlock. I have sat in vehicle and tried to deadlock , alarm light flashes but movement sensor does not set off siren, in fact nothing sets off siren modalities displayed.- ready to burn it

 

Datatek

Well-Known Member

• Jun 5, 2014

• #2

You are better off if it doesn't deadlock (Superlock), if anything goes wrong it can be a nightmare to gain entry to the car. If you are serious, you need diagnostics.

 

R

Rick-the-Pick

Active Member

• Jun 5, 2014

• #3

Yes, Listen to Datatek.

If superlock isn't working, that's great. We wish we could stop it working on all P38's.

 

T

tmb180

New Member

• Jun 5, 2014

• #4

If I find out why I will let you all know so that you can disable it :>)

 

mozz smith

Well-Known Member

• Jun 5, 2014

• #5

cant wait for the outcome of this one then !!!!!!!!!!!!!!!! alas poor yorik

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

• Jun 6, 2014

• #6

Someone may already have cut the wire that superlocks it. Failing that the little motor in the lock actuator might have burnt out. Finally it might be one of the little microswitches in the bottom of the lock actuator.

As most have already said: leave it! Disabled superlock is doing you a favour!

 

kooky_guy

Well-Known Member

• Jun 9, 2014

• #7

Mine's never worked either and I've never worried about it, but as the OP mentions the alarm doesn't seem to activate in this situation either.

 

gfromleeds

Well-Known Member

• Jun 9, 2014

• #8

Feck dont complain if the alarm dont work! it causes nowt but problems usually

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

• Jun 10, 2014

• #9

Yeah, the missus superlocked ours and then the alarm activated itself and immoblised it. I had to rescue her using Nanocom and the only way I could get it to start was to disable the alarm.