A sledge hammer:eek: You might be in for a new axle if the yoke is bent:eek::eek::eek:

I might have formulated my sentence wronh. I used the sledge hammer to remove the axle with the brake disc on, hammering the backside of the brake disc. I did not hammer on the yoke.
 
I might have formulated my sentence wronh. I used the sledge hammer to remove the axle with the brake disc on, hammering the backside of the brake disc. I did not hammer on the yoke.

Any chance of looking at another one over there and conparing? Or getting a scrapper / axle off a scrapper?
 
I had the swivelhub in the press you know to get the stupid rusted balljoint out… used 6 tons on it.. i mustve bent it slightly i suppose.
Even tho i had supporter it in the middle
 
I had the swivelhub in the press you know to get the stupid rusted balljoint out… used 6 tons on it.. i mustve bent it slightly i suppose.
Even tho i had supporter it in the middle

I think you got unlucky. Both mine and my brothers pressed out using a large C-shaped press, albeit we did break one trying to get the new ones in.
 

Similar threads