RangeRoller dt
Well-Sprung Member
Hope it goes better for you now they’ve been unstuck
tomcat59alan
Well-Known Member
You need a proper balljointsplitter ,one that won't destroy the dust cover on the joint.see item 5060504000727 on eBay to see what I mean.
Last edited:
RangeRoller dt
Well-Sprung Member
Don’t worry about the seal it wasn’t working as intended I would have binned either way.
im struggling to find the item on Ebay, there are no items with such numbers.
the one i got can open 5cm and take 2cm in diameter joints.. but i just cant manage to get it inbetween the joint..
tomcat59alan
Well-Known Member
Try eBay UK, work's for me and will give you an idea what to look for.
myfirstl322
Well-Known Member
You've one too many numbers there...at a guess prolly one of the trio of zero's.
tomcat59alan
Well-Known Member
Just tried it again,5060504000727and it works for me., morning sausage.
myfirstl322
Well-Known Member
Ebay item numbers are 12 digits...your number somehow links to this item, but the number is different when you scroll down.Just tried it again,5060504000727and it works for me., morning sausage.
Morning.
https://www.ebay.co.uk/itm/124340226626?epid=11024967521&hash=item1cf3414a42:g:XugAAOSwI4Ng0JXq&amdata=enc:AQAHAAAA4F/a0LITlRLQaIEqnRknQvA/AtF9qa3SxfYkHVd5/UOGQBNrt7AJUJ1TDXUpAivkPuEQjio8GKZEumrbIBb0UinYpEXy2NDN/MQ0MabkGf+0w11QQ2IjPh9YJmu1MwtRXC3jE8P6P+fO2QB5J/jrmtoDy9hFcga7+5JoF6qf5wbFwGEObB9FKzHraN3tsEe7gKYkLFEg0Mhnim6BIboE1aPk5FfFiCK1Tr/5u9fT7USwHa92Whuifgovtt8faXB++vDA8LbIIp1u2hIdZWTXBvrXN55CMCLo055XXs8abfiX|tkp:BFBM6vHYwbRg
tomcat59alan
Well-Known Member
Your quite right sausage, I've just put the number I posted in and the item I wanted to show appears but when you scroll down it gives a new item number of 124340226626.Ebay item numbers are 12 digits...your number somehow links to this item, but the number is different when you scroll down.
Morning.
https://www.ebay.co.uk/itm/124340226626?epid=11024967521&hash=item1cf3414a42:g:XugAAOSwI4Ng0JXq&amdata=enc:AQAHAAAA4F/a0LITlRLQaIEqnRknQvA/AtF9qa3SxfYkHVd5/UOGQBNrt7AJUJ1TDXUpAivkPuEQjio8GKZEumrbIBb0UinYpEXy2NDN/MQ0MabkGf+0w11QQ2IjPh9YJmu1MwtRXC3jE8P6P+fO2QB5J/jrmtoDy9hFcga7+5JoF6qf5wbFwGEObB9FKzHraN3tsEe7gKYkLFEg0Mhnim6BIboE1aPk5FfFiCK1Tr/5u9fT7USwHa92Whuifgovtt8faXB++vDA8LbIIp1u2hIdZWTXBvrXN55CMCLo055XXs8abfiX|tkp:BFBM6vHYwbRg
Relisted item probablyYour quite right sausage, I've just put the number I posted in and the item I wanted to show appears but when you scroll down it gives a new item number of 124340226626.
For the swivel, two hammers on either side at same time, plus the wedge splitter hammered in tight to pre-load the taper. Check which joint is more wobbly, and do the other one first. That way the swivel has movement to allow the taper to move.
For trackrod ends I usually use either use the hammer trick or a tool like that ebay one.
fck it, im buying the truck ball joint seperator and taper joint tools for 240pounds...
will atleast get the job done for sure!! then i can get the bugger to MOT finally
funny thing is the vendor JUST started to sell thoose, or im just dumb and havent found them!
will atleast get the job done for sure!! then i can get the bugger to MOT finally
funny thing is the vendor JUST started to sell thoose, or im just dumb and havent found them!
Last edited:
I assume the top balljoint is trashed? No idea why it came out like that or why its so god damn stuck Question is if the new balljoints will be seated correctly or if the bore is to big?? Or is it maybe not considered as a balljoint change as they only been there for a week and driven 1 time
Question is if the new balljoints will be seated correctly or if the bore is to big?? Or is it maybe not considered as a balljoint change as they only been there for a week and driven 1 timetomcat59alan
Well-Known Member
From memory so I may be wrong,only one is a balljoint and the other is a swivel pin.I assume the top balljoint is trashed? No idea why it came out like that or why its so god damn stuck
are there two different part number for the top and bottom? Just checked and lower joint is FTC3571and upper is FTC3570
Last edited:
From memory so I may be wrong,only one is a balljoint and the other is a swivel pin.
Yes, there are 2 different part numbers dividing top and bottom.
If i am not wrong, the top balljoint only moves vertical whilst the lower one fiddles around as a normal ball joint? Will that say i can just pop the top one in again? If its just held by vacuum or anyhow?
tomcat59alan
Well-Known Member
I wouldn't take the chance, you don't know what damage you've done.think it should be a turning motion rather than a vertical movement, sorry @Rubberknees .
