hello me again on air suspension,turns out the driver pack is showing old age,this means it loses air overnight,it would appear the valves are tired,the pump in the driver box is running almost constantly,now you can buy service kits for these,or is it worth trying to find a reconditioned one,or go for new,which may mean going for the compressor as well.
kooky_guy
Well-Known Member
Who told you it was the driver pack?
Sounds much more likely to be leaky o rings in the valve block if you can't find any other leaks.
There are overhaul kits available for the valve blocks. I need to do mine sometime but everything else keeps breaking so I've not got round to it yet.
Guy
Sounds much more likely to be leaky o rings in the valve block if you can't find any other leaks.
There are overhaul kits available for the valve blocks. I need to do mine sometime but everything else keeps breaking so I've not got round to it yet.
Guy
no i haven't done a leak test yet,how is this done,soapy water?
sorry this is all very new to me,thankyou for any help you can give,
the pump does run a fair bit,and i am worried i will wear it out prematurely.
i have also replaced all the airbags,does it need resetting,or will it set itself,airbags on the suspension that is.
yep leaky o rings,is that where the pipe goes in?i put some soapy water there,and sure enough loads of bubbles,but only on no3,how do i go about replacing these,do you just unscrew the valve?or remove the whole box.
There are numerous orings in the valve block.The block must be removed to replace these.Have a look at PaulP38A.com .There is a pictoral guide on there on how to overhaul the valve block.
that is great thankyou very much,will get me a kit and do the lot.
yes that is a better approach.
rasheed
Well-Known Member
I'd get around to it. The valve kit works 99% of the time. The compressor kit works provided the compressor cylinder and bearing haven't gotten totally shagged. Then you'll need a new compressor.
kooky_guy
Well-Known Member
Yeah, well it looks like my gearbox is buggred now so it's going to have to wait.
Seriously unimpressed with it at the moment. Now where did I put those matches...?
in the middle of a compleat eas over haul at the moment
all bags replaced
new hight sensors fitted (mine playing up causing pump to run constantly)
pump overhauled by symanize on ebay top bloke got al lmy parts off him hes in rugley near tamworth peice of **** half an hour total for both sides rears a bastard hour an half each
just the air drier and valve block to go
all bags replaced
new hight sensors fitted (mine playing up causing pump to run constantly)
pump overhauled by symanize on ebay top bloke got al lmy parts off him hes in rugley near tamworth peice of **** half an hour total for both sides rears a bastard hour an half each
just the air drier and valve block to go
i know exactly how you feel,i was close to breaking point with mine,the only thing is when they work,what a fine vehicle they are,but when they breakdown they can be so frustrating.
i do try and keep the petrol can a fair distance from the truck,but the temptation can be strong!
