PopPops
Well-Known Member
Has this a few years back. Switched off and left a few hours (I had to, I'd just driven onto a ferry). Came back, all OK and hasn't returned since.
Is it permanent? The CANbus is for communication between the gearbox ECU and the engine ECU, so it may be worth checking the engine ECU connectors. Another possibility is that the gearbox loom has frayed around that notorious P-clip. You may get back up and running by moving the loom a bit in that area.
Do you have a Nanocom, or is it another diagnostic?
Good luck, I know how you feel, I was on a ferry to France!!
MJI
Well-Known Member
They come straight back
sierrafery
Well-Known Member
Check the ECM red plug, oil can affect the CAN signal too... also check connection in C0162/0448 white and yellow wires(pins 5-6) are the CAN link there, give some contact spray there... if these are ruled out and no joy you'll have to make a continuity check on that circuit between the ECM and TCU
also the battery must be powerfull as well
also the battery must be powerfull as well
Attachments
MJI
Well-Known Member
150 miles, luckily now kk
