danny6801

Well-Known Member

• Oct 17, 2015

• #1

My transfer box has decided to pee oil out the front output shaft a week before I go away laning in it my problem is what type of hammer puller will be suitable to buy off eBay or similar. Is it a hard job 2.

5pc INNER BEARING PULLER SET REMOVER SLIDE HAMMER BLIND HOLE INTERNAL | eBay http://www.ebay.co.uk/itm/5pc-INNER...694739?hash=item419d67b913:g:t9AAAOSw0HVWAuME (Share from CM Browser)

 

jamesmartin

Well-Known Member

• Oct 17, 2015

• #2

if its just the seal remove flange and prise old seal out no need of a slide hammer

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Oct 17, 2015

• #3

Will pull out with screwdriver,
Remove prop, loosen nut and remove flange

Pull seal out with large flat blade screwdriver

Fit new seql with drift

Refit removed parts with new felt washer

 

danny6801

Well-Known Member

• Oct 17, 2015

• #4

That's will be good news. How can you tell if the bearing has gone.

 

danny6801

Well-Known Member

• Oct 17, 2015

• #5

Hopefully will just be the seal as it's really losing a lot of oil very quickly. There doesn't seem to be any movement from the shaft.

 

jamesmartin

Well-Known Member

• Oct 17, 2015

• #6

rotate it and feel it

 

danny6801

Well-Known Member

• Oct 17, 2015

• #7

Will do thanks again James hopefully just the seal.