Orch
Active Member
Wide arch extensions that require you to cut out loads of the standard arch, then fit over the top - Discovery 2 75mm £140.00 - FLEXI ARCHES - Discovery 2 Flatdog UK
Gives much more room for tyres and sticks out far enough to cover them
Gives much more room for tyres and sticks out far enough to cover them
Orch
Active Member
Haha, cheers dude 
Yeh I know you mean, I bet the previous owner would cry if he saw it now, he clearly polished it A LOT when he had it.
My Dad also likes to remind me what a nice family car it was everytime I'm plugging the grinder in :lol:
Yeh pretty settled on the Mudzillas now. Tyres are something I obsess about constantly. I hate to think how many hours I've spent interwebbing on tyre sizes and brands in the last couple of years. I had to flick through pretty much every feckin page of your build thread (for about the third time) to find out what your pitbulls were by the way :lol:
Dead chuffed I think I've found a source for 16x10 in D2 fitment. Some pretty hefty offset though so hope me bearings are up for some grief!
Although I attempted to plant the 'new set of wheels and tyres seed' with the missus last night. Didn't go down as well as hoped, so might take a while. Although I think I have a plan, she doesn't want me spending another four digits on the car when I'm supposed to be getting the house ready for sale, so I'll just buy them bit by bit. Arches first, then the wheels, then a single tyre each month. I reckon I'll get as far as the first tyre before she's screaming to get them out the house. Well ok luv if you insist I'll just get on with it :lol:
Yeh I know you mean, I bet the previous owner would cry if he saw it now, he clearly polished it A LOT when he had it.
My Dad also likes to remind me what a nice family car it was everytime I'm plugging the grinder in :lol:
Yeh pretty settled on the Mudzillas now. Tyres are something I obsess about constantly. I hate to think how many hours I've spent interwebbing on tyre sizes and brands in the last couple of years. I had to flick through pretty much every feckin page of your build thread (for about the third time
) to find out what your pitbulls were by the way :lol:Dead chuffed I think I've found a source for 16x10 in D2 fitment. Some pretty hefty offset though so hope me bearings are up for some grief!
Although I attempted to plant the 'new set of wheels and tyres seed' with the missus last night. Didn't go down as well as hoped, so might take a while. Although I think I have a plan, she doesn't want me spending another four digits on the car when I'm supposed to be getting the house ready for sale, so I'll just buy them bit by bit. Arches first, then the wheels, then a single tyre each month. I reckon I'll get as far as the first tyre before she's screaming to get them out the house. Well ok luv if you insist I'll just get on with it
:lol:
Mr Noisy
Coming in your ears.
sounds like you have a good plan orch
have you checked garageand4x4/extremeoffsetwheels.co.uk for your rims
thats where mine came from years ago
seem to be the only people supplying -50 offsets
also regards tyres, i looked for some more pitbulls recently, not too bad at not much over 200 dollars each
but to send two tyres to the uk?
estimate 800 dollars shipping, plus uk import tax
ouch
have you checked garageand4x4/extremeoffsetwheels.co.uk for your rims
thats where mine came from years ago
seem to be the only people supplying -50 offsets
also regards tyres, i looked for some more pitbulls recently, not too bad at not much over 200 dollars each
but to send two tyres to the uk?
estimate 800 dollars shipping, plus uk import tax
ouch
Orch
Active Member
Yeh extremeoffsetwheels is the one I found too. Nice and deeeeeep
Jesus christ! Just tell them the bloody boat is coming over anyway, just sling the tyres on top FFS :lol:
I know what you mean though, I was looking at some stuff in Aus that would be good deal if you didn't have to pay three times the cost to get it over here.
I really want some longer shocks but the +3 terrfirmas I have are the longest I can find off the shelf for a D2. Only thing I can really do is get something like Bilstein 6100/7100 shocks and fit adapters, but that means importing them so gunna be well into four figures.
Orch
Active Member
Orch
Active Member
Cheers Greg. Nothing rekindles the love like a day out slinging mud!
Here's a little vid, nothing too exciting but shows the exhaust off quite well lol https://www.youtube.com/watch?v=9pfBWGj-MyQ&feature=youtu.be
Next job on the list is to sort the brakes out. TC got hammered hard yesterday and I pretty much had sod all left driving home. When slowing to a stop the whole rear end is crunching and shaking, I'm not even convinced there's any pads left!
Here's a little vid, nothing too exciting but shows the exhaust off quite well lol https://www.youtube.com/watch?v=9pfBWGj-MyQ&feature=youtu.be
Next job on the list is to sort the brakes out. TC got hammered hard yesterday and I pretty much had sod all left driving home. When slowing to a stop the whole rear end is crunching and shaking, I'm not even convinced there's any pads left!
Orch
Active Member
ha! if only
I'm intrigued to know what happened tbh. Some muppet ran over the jetwash at the P&P so I couldn't give them a clean like normal. Usually I get a few miles of weak brakes then they clean up. This time was way worse but i assumed it was the lack of cleaning right up until I got the the grinding noises and big juddery vibrations from 15 - 0MPH.
Will have to whip them off and see what's happening.
I'm intrigued to know what happened tbh. Some muppet ran over the jetwash at the P&P so I couldn't give them a clean like normal. Usually I get a few miles of weak brakes then they clean up. This time was way worse but i assumed it was the lack of cleaning right up until I got the the grinding noises and big juddery vibrations from 15 - 0MPH.
Will have to whip them off and see what's happening.
Gregja
Active Member
I'm stripping my front brakes tomorrow to put new slide pins on as mine have play in them so it might make the pedal firmer. Your exhaust sounds spot on, I had a quote for £90 to fit a custom straight through exhaust with side exit tail pipe.
That's from Greenwood Silencers in Rochdale it's a job I can't wait to get done. They did my y-pipe for my Range Rover after I put Hedman Headers on it and there work is spot on. Hope you solve the brake issue though.
I've adjusted my steering box and also found a loose track rod end on the drivers side so after solving those 2 issues it actually drives quite nice now I just need to sort the brakes pulling and centre the steering wheel. Then it's almost there for me at least
That's from Greenwood Silencers in Rochdale it's a job I can't wait to get done. They did my y-pipe for my Range Rover after I put Hedman Headers on it and there work is spot on. Hope you solve the brake issue though.
I've adjusted my steering box and also found a loose track rod end on the drivers side so after solving those 2 issues it actually drives quite nice now I just need to sort the brakes pulling and centre the steering wheel. Then it's almost there for me at least
Last edited:
Orch
Active Member
Yeh I had to put new slide pins on mine as well, most of them had seized up. Depending on how the next pay cheque looks I might replace all the discs. They've only a 1000 miles if that but grooved and drilled was a bad idea for a mud machine. Oh well, you live and learn.
Glad you're getting your niggles sorted. You know it won't be long until the next arrives though, these discos don't like giving you much peace
Glad you're getting your niggles sorted. You know it won't be long until the next arrives though, these discos don't like giving you much peace
Gregja
Active Member
Yeah they look shagged :-( 1000 miles is shocking my brakes still pull even though I did the slide pins I have found a broken seal on the side it doesn't pull too so I think it's ceased up I'm going to replace the pistons and discs and pads. What are you thinking for replacing them. Brembo discs are only about £50 on eBay. I don't know what pads though maybe mintex or ferrodo.
